How much does a digital display indicator cost

Mitutoyo Digital Indicator 543-737B from Japan

543 series TOOLUTE digital indicator

ID-CNX

Product Description:

Supports bidirectional communication between ID-C and PC, not only can data be output to PC, but also various ID-C function settings can be performed through PC.

Using the ABS (TOOLUTE) sensor developed by Sanfeng, with a set origin of * 1, the origin can be restored even when the power is turned off. Every time the power is turned on, there is no need to restore the origin and measurement can begin.

Adopting the ABLUTE linear encoder developed by Sanfeng, it can eliminate overspeed errors and improve measurement reliability.

By setting upper and lower limit values, tolerance determination measurement can be carried out. In addition, only the tolerance judgment results can be enlarged and displayed.

● Digital/analog display, which can intuitively grasp subtle actions such as proximity to nominal values or upper and lower limits of tolerances.

Under continuous use, the battery life can reach about 2.5 years.

Equipped with data output ports, it can be connected to measurement data network systems and statistical process control systems.

● Large LCD display: Adopting a large LCD display with analog bars improves the readability of measurement values.

3 large buttons: Due to the use of 3 large buttons, the operability is greatly improved. Each button can be set with commonly used functions as desired.

● Display unit 330 º rotation display: The display unit can be rotated 330 º, making it easy to read measurement results from the desired angle.

Calibration date warning function: When the set calibration date is reached, the LCD screen displays a warning mark. Helps with timely precision management of measuring instruments.

Before the deadline (such as one week before the calibration date), the calibration date warning sign will flash. If the deadline is exceeded, the entire screen will flash a warning.

Mitutoyo Digital Indicator 543-737B from Japan

■ General specifications

● Display: 7-digit LCD, symbol

Power supply: 1 button type silver oxide battery CR2032 (standard accessory, used for digital display)

● Battery life: Approximately 2700 hours of continuous use, typically around 2.5 years of use

*The battery life depends on the frequency and method of use, and the above numbers are for reference only.

● Response speed: unlimited (does not support scanning measurement)

■ Function

Peak detection function (MAX value/MIN value)

● Jump detection function (difference between MAX and MIN values during movement)

● Zero setting function (INC measurement system origin setting)

● Preset function (ABS measurement system origin setting)

● Counting direction conversion

● Tolerance judgment

Resolution conversion（Resolution 0.0005 mm type

Calculation function f (x)=Ax

● Function lock

● Data output

Calibration warning

● Automatic shutdown

● Display value retention function (not connected externally)

● Display rotation function (330 º)

● Low voltage warning

● Error Warning

■ Options

● Pole lifting options

Measuring rod lifting rod: No.21EZA198

(Used for measuring range of 12.7 mm type)

Measuring rod lifting cable: No.21JZA295

Improvement of 12.7 mm: Measurement range of 12.7 mm type

Measuring rod lifting button:

No.21EZA105 (for measuring range 12.7 mm type)

No.21EZA197 (for measuring range 25.4mm type)

No.21EZA200 (for measuring range 50.8mm type)

Measuring rod lifting hook: No.21EAA426 * 1

(Measuring range 25.4/50.8mm for type)

● Used for reverse positioning of the indicator table

No.02ACA571 (for measuring range 25.4mm type)

No.02ACA773 (for measuring range 50.8mm type)

● Connection line:

1m: No.06AGL011

2m: No.06AGL021

● USB direct data input tool

USB-ITN-SF ( 2m ) : No.06AGQ001F

Input Tool Measurement Data Input Device

USB keyboard signal conversion device IT-020U: No.264-020

RS-232C Communication Conversion Type IT-007R: No.264-007

● U-WAVE-T dedicated connection cable

Standard use: No.02AZG011 (160mm)

Foot switch: No.02AZG021

U-WAVE connection device (ID-CNX. 12.7mm type dedicated)

No.02AZF700

● Digimatic microprocessor

DP-1VA LOGGER ： No.264-505DC

Product Specifications

Metric type

public/Imperial system type

Product dimensions:

Disclaimer: Recently, our company and reputation have been maliciously defamed by competitors. We solemnly promise that Suzhou Chongrui Instrument Co., Ltd. is not a subsidiary of any company. We urge all users to be vigilant and beware of being deceived.