High temperature and high pressure water temperature machine

High temperature and high pressure water temperature machineWater in the middle is a good heat transfer medium, which can be used as both a heating medium and a cooling medium.The heating surface of the high-temperature and high-pressure water temperature machine is composed of U-shaped tube bundles. The U-shaped tubes absorb the continuously generated heat in the evaporator space of the heater, and the water flows out from the outlet water chamber of the heater.

The high-temperature and high-pressure water temperature machine and organic heat carrier furnace have the following characteristics: liquid-phase transportation of heat energy, small heat loss, significant energy-saving effect, and good environmental protection effect. Closed loop heating, connected to the atmosphere, can extend the service life of the boiler. The significant feature of the thermal oil boiler is counterflow heat exchange, and the temperature difference between the combustion exhaust gas and the thermal oil outlet is below 30 ℃.Organic heat transfer material heatersThe excellent structure of the heat transfer oil boiler mainly operates at lower pressures, obtaining working temperatures below 450 ℃, and has the characteristics of low pressure and high temperature.Organic heat transfer material heatersAdopting a three loop coil design, this DC structure determines the safety that traditional boilers do not have. Due to the use of a coil structure, the heating surface is sufficient, resulting in high thermal efficiency.The heating temperature of the water temperature machine can reach 180 ℃, and the heating temperature is stable. It adopts automatic control, high sensitivity, safety and reliability, and stable heating. Our company specializes in the research, development, and production of thermal oil furnaces. The oil heater is equipped with complete operation control and safety monitoring devices, making it easy to operate, safe, and reliable.

The water in the water temperature machine is a good heat transfer medium, which can be used as both a heating medium and a cooling medium.The water temperature machine is computer-controlled, with stable operation at low pressure (≤ 0.4MPa) and high thermal efficiency. In the mold temperature machine industry, there are always some special mechanical equipment with special requirements for their working temperature. In order to fully meet the requirements of customers, our company has been committed to the design, production, and research and development of temperature control equipment for a long time, and the high-temperature and high-pressure water temperature machine is one of them. As we all know, the boiling point of water is 100 ℃. Under normal circumstances, standard water temperature machines and temperature controllers can only achieve a high control temperature of 100 ℃. However, in order to meet the temperature control requirements of some mechanical equipment that are slightly higher than 100 ℃ and are not suitable or willing to use oil temperature machines, high-temperature and high-pressure water temperature machines have emerged, which pressurize boiling water at a temperature of 100 ℃. When the pressure increases, the boiling point of water also increases accordingly, and can be increased to 180 degrees Celsius, thus meeting the temperature control requirements of slightly higher than 100 degrees Celsius.

Technologies in various industries are constantly changing, constantly improving, and gradually growing to fully meet customer needs and fulfill customer wishes. After several years of continuous improvement, our company has successively developed high-temperature oil temperature machines, low-temperature chillers, chemical specific chillers, die-casting specific mold temperature machines, extrusion specific mold temperature machines, and so on. They are all based on standard temperature control equipment and can further fit auxiliary equipment, with stronger or more specialized functions.We constantly improve ourselves not only by meeting customer requirements, but also by looking at ourselves from a higher starting point and creating mutual benefits and win-win outcomes. Create a cost-effective high-temperature and high-pressure water temperature machine.