Guangdong Two Box Clean Oven

Two box typeOverview of Clean Drying Oven:

This is a special clean drying equipment that provides a high-temperature purification environment. The air inside the box is enclosed and self circulating, and is repeatedly filtered by a high temperature resistant and high-efficiency air filter (Class 100) to keep the oven working room in a dust-free state. The studio is made of stainless steel structure. The temperature inside the studio is automatically controlled by a temperature controller, equipped with automatic constant temperature and time control devices, and equipped with automatic power-off and alarm circuits for overheating, ensuring reliable control and safe use.

Two box typeCharacteristics of clean drying oven:

1. Full week argon welding, high temperature resistant silicone compression, SUS304 # stainless steel electric heating generator, to prevent the machine from generating dust;

2. High temperature resistance, under the premise of achieving a cleanliness level of Class 1000 in the workplace, the laboratory can effectively filter fine dust to achieve a cleanliness level of Class 100;

3. Stacked combination design reduces the occupied area of the site and has high efficiency.

2、 Execution and compliance with standards

GB/T11158-1989 Technical Conditions for High Temperature Test Chamber

GB2423.2-1989 Test B

　　Usage of clean drying oven

The dust-free oven is suitable for electronic LCD displays LCD、CMOS、IC、 Pharmaceutical, laboratory and other production and research departments.

The dust-free oven can also be used for drying, heat treatment, aging, and other high-temperature tests of non-volatile and non flammable and non explosive materials.

3、 Technical parameters of two box clean oven TM100-2

1. Temperature range: 50~200 ℃;

2. Cleanliness: Level 100;

3. Volatility: ± 0.5 ℃;

4. Temperature deviation: ≤± 2.0 ℃;

5. Working dimensions: depth 400 x width 500 x height 500mm;

6. Single slot capacity: 100L

7. Heating rate: ≥ 2 ℃/min (average throughout the entire process)

8. Overall power: 6.5KW;

9. Power supply: 380V 50Hz

4、 Room structure and materials used

1. Box material: The outer box is made of SS41 # medium carbon steel plate treated with phosphate film salt and coated with two layers of anti gloss paint, which can prevent

Particulate dust;

2. Interior material: SUS304 # non-magnetic mirror stainless steel is used;

3. Insulation material: ultra-fine glass wool;

4. Exhaust port: ф 50;

5. Partition: 2 layers, stainless steel square tube, with a load-bearing capacity of about 30KG.

6. Air circulation device: large capacity axial motor;

7. Heating method: stainless steel electric heater;

5、 Measurement and control system and security protection measures:

1. Temperature measurement sensor: Pt100 platinum resistor;

2. Control instrument: imported digital temperature controller, PID regulation, control accuracy of 0.1 ℃;

3. Overtemperature protection instrument: an overtemperature protection system independent of the main control of the studio, ensuring the safety of the test sample;

4. Control system: The main electrical components are imported raw materials such as Snyder and Omron;