Domestic salt spray test chamber manufacturer

one：Material of Salt Spray Test Chamber Body:
1: 5MM imported gray white P.V.C board
2: Support frame: 10.0mm tempered glass rod with corrosion resistance. Place the plastic steel V-shaped frame and glass rod at a 30 degree angle to ensure that the test object is angled
3: Body bracket: SECC channel steel with angle iron spray painted Four wheel sliding Can be pushed and walked (limited to models 120 or above)
4: The pressure drum is made of seamless welded 2.0MMSUS201 stainless steel plate.
6: Titanium tubes are used for heating Long service life and high corrosion resistance
7: The hood is made of 5MM imported transparent acrylic board Exquisite workmanship, beautiful appearance, high transparency
two：Salt spray test chamber control system:
1. DHC temperature controller, digital display PID automatic calculation, SSR output, high stability platinum temperature probe. Temperature error during salt spray test is ± 1℃.
2. The pressure tank adopts Henry's law and is heated and humidified to achieve a laboratory humidity of over 95%, which meets national standards.
three：Salt spray test chamber timing system:
Adopting a high-precision multifunctional timer, the test time can be set with multifunctionality, ranging from 0.001S to 999.9H. Equipped with power outage memory function, it can continue to work according to the time before the power outage, until the product completes the required time, avoiding redoing the experiment after the power outage.
4： Salt spray test chamber water replenishment system:
Adopting an automatic/manual water addition system, it has the function of automatically/manually replenishing water when the water level is insufficient. The experiment is uninterrupted, meeting the diverse environmental requirements of customers. (Automatic water replenishment only needs to be connected to the tap water pipe)
5： Heating method for salt spray test chamber:
During the salt spray experiment, steam direct heating method is used, which has a fast heating speed, uniform temperature distribution, and reduces standby time.
6： Control mode of salt spray test chamber:
Five key standard operation. Equipped with a full detection fault warning system. The light can be turned on when a malfunction occurs. Five key operation includes a power switch, an operation switch, a spray switch, a timing switch, and a demist switch. During the experiment, turn on the power switch and the instrument will automatically add water. After adding water, turn on the operation switch Set the test temperature, the instrument will automatically heat up, turn on the spray switch, the instrument spray starts, turn on the timing, set the time, and end after the test time is completed Built in manual defogging function During the experiment, the product can be placed or viewed to remove the accumulated salt spray.
7： Salt spray test chamber safety protection device:
1. Equipped with dual over temperature protection, it can automatically cut off the heating power supply in case of temperature control meter failure or heating system failure. Avoid damaging the instrument due to excessive temperature.
2. Double low water level protection to prevent dry burning and damage to laboratory and pressure drum heating pipes.
3. Equipped with overload and short circuit protection. Prevent damage to instruments and internal electrical control components in case of abnormalities If any low water level occurs, the machine alarm will turn on and beep to prompt! Easy to detect in a timely manner without being near the machine!
8： Salt spray test chamber measuring cylinder:
Two built-in fog collection tubes (one for Y/Q-60 type) are used. Compared to traditional external models, it is less prone to damage.
nine：Salt spray test chamber nozzle:
Precision quartz glass nozzle Ensure no crystallization after 4000 hours of use The spray tower is equipped with a conical disperser, which has the functions of guiding fog, regulating fog saving, and even fog falling.
ten：Sealing method of salt spray test chamber:
The connection sealing groove between the inner and outer boxes adopts water sealing Prevent salt spray leakage
eleven：Salt spray test box control panel and electrical accessories:
Two temperature controllers (DHC)
One pressure gauge (Taiwan, China)
Six indicator lights (Taiwan, China)
Timer (OMRON) one
Accumulator (Anliang) one
Five control switches (Taiwan, China)
Two SSRs (Yangming, Taiwan, China, China)
Three relays (Omron from Japan)
Two temperature sensing lines (Shenjie, Taiwan, China, China)
Two pressure regulating valves (AIRTAC)
Four solenoid valves (AIRTAC)
Four water level indicators (Xiangyang, Taiwan, China, China)
Two heating tubes (titanium tubes)
EGO One
12： Instructions for accessories of salt spray test chamber:
Four V-shaped support frames (60 type)
8 O-shaped support rods (60 type)
Two bottles of sodium chloride
One 5000ML measuring cup
Two packs of pH test paper
One 50ML measuring cylinder (60 type)
13： Temperature range of salt spray test chamber:
1: Laboratory temperature: 35℃—50℃(Can be set arbitrarily)
2: Pressure bucket temperature: 47℃—63℃(Can be set arbitrarily)
14： Heating rate of salt spray test chamber:
1: Laboratory, at room temperature→35℃About 35 minutes
2: Pressure bucket, at room temperature→47℃about 15 minutes
15： Temperature accuracy of salt spray test chamber: ± 1℃
16： The salt spray test chamber is suitable for neutral salt spray testing (NSS) and corrosion testing (AASS, CASS).
17： Standard for use of salt spray test chamber:
CNS3627、3885、4159、7669、8886、JIS D-0201、H-8502、H-8610、K-5400、Z-2371、ISO 3768、3769、3770、ASTM B-117、B-268、GB-T2423、GJB 150.
18： Built in functions of salt spray test chamber:
Salt water spray testing machine is suitable for surface treatment of various materials, including coating, electroplating, organic and inorganic film, anodic treatment, anti rust oil and other anti-corrosion treatment to test the corrosion resistance of its products.