Fully automatic solid-liquid blowing and capturing instrument company

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The PTC-V fully automatic blowdown trap is a blowdown trap with a 100 bit automatic sampling system, suitable for solid or liquid VOC pre-treatment. By combining with GC or GC-MS, it can be widely applied in environmental analysis, such as the analysis of organic pollutants in drinking water, wastewater, and soil, as well as the analysis of volatile compounds (such as odor components) in food. This instrument complies with standards such as "HJ639-2012 Determination of Volatile Organic Compounds in Water Quality by Sweep Capture/Gas Chromatography Mass Spectrometry", "HJ686-2014 Determination of Volatile Organic Compounds in Water Quality by Sweep Capture/Gas Chromatography Mass Spectrometry", and "HJ605-2011 Determination of Volatile Organic Compounds in Soil and Sediments by Sweep Capture/Gas Chromatography Mass Spectrometry". The unique water removal technology endows PTC-V with strong water removal ability, effectively reducing the impact of water on GC/GC-MS. The precise electronic flow control and efficient trap analysis efficiency make PTC-V have efficient and stable analysis efficiency.

Product Details

Key Features:

1. Strong universal performance: can be used in combination with any brand of gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS).

2. The electronic flow control system is programmed to precisely control flow.

3. Automatic addition of internal standards, simple operation, convenient use, fully controlled by software, high degree of automation: simply place the sample bottle into the sample tray, and all operations and controls are completed by the control software, resulting in good sample repeatability; The large touch LCD panel design in the host can track temperature and operation commands throughout the process.

4. * Cold trap adoptsSemiconductor refrigeration+air coolingThe refrigeration temperature can reach -30 ℃ (at room temperature of 20 ℃), meeting most low-temperature enrichment needs.

5. * The temperature of the capture trap is raised usingDirect resistance heating，heating rate＞3000℃/divide.

6. * built-inFoam sensorThe foam in the purging pipe can be detected to prevent the sample pipe from being polluted and protect the entire analytical system.

7. *The cleaning frequency of the sampling needle and blowing tube can be customized.

8. * Solid sample bottles can be heated and directly injected with distilled water for magnetic stirring, mixing, and blowing.

9. Capture trap and blowback tube for gas separation to reduce cross contamination between samples. In the blowback cycle, the compounds blown out from the trap will not flow into the purge tube.

10. Unique dehydration technology greatly reduces the impact of water vapor on GC and GC-MS.

11. The sample tubing is made of PEEK material and treated with silane inert stainless steel to reduce residual pollution.

12. Hot water can be used to flush and blow pipes to reduce residue.

13. All sample pipelines and six way valves are temperature controlled for heating, eliminating system cold spots and reducing sample loss.

14. Provide a synchronization interface that can start both the chromatography and workstation simultaneously during sample injection.