Explosion proof oil circulation heater, explosion-proof electric heating, thermal conductivity

Explosion proof electric heating thermal oil furnace is a type of furnace that converts electrical energy into thermal energy to heat materials that need to be heated. In work, low-temperature fluid medium enters its input port through a pipeline under pressure, follows a specific heat exchange channel inside the electric heating container, and uses the principles of fluid thermodynamics to design a path that takes away the high-temperature thermal energy generated by the electric heating element during operation, causing the temperature of the heated medium to rise. The outlet of the electric heater obtains the high-temperature medium required by the process. The internal control system of the electric heater automatically adjusts the output power of the electric heater based on the temperature sensor signal at the output port, making the temperature of the medium at the output port uniform; When the heating element exceeds the temperature limit, the independent overheating protection device of the heating element immediately cuts off the heating power supply to prevent the heating material from overheating and causing coking, deterioration, carbonization, and in severe cases, burning out of the heating element, effectively extending the service life of the electric heater.

Explosion proof electric heating oil furnace | Explosion proof heat transfer oil heater | Explosion proof electric heater features:

1.Maximum operating temperature 300℃
2.Pipeline explosion-proof device
3. Air blowing and oil return function (optional)
4. Return oil temperature display table
5. Heating power switching function
6. Negative pressure system operation (optional)
7. Instant cooling startup function (optional)
8. Isolation type electrical control box, extending the service life of electrical appliances
9. RS485 communication function for automated management (optional)
10. Hot oil BY-PASS pressure relief circuit
11. Multi point temperature control unit can be customized
12. Oil pump horsepower and heating power can be customized
13. 电器采用 OMRON,FUJI,TE,LG,MOELLER,ABB, SIEMENS,JUMO
14. Control method: Adopting imported microcomputer or (optional) PLC control
15. Comprehensive safety protection, fault display, no need for professional personnel for repair and maintenance
16. The design and manufacturing of organic heat carrier furnaces shall be carried out in accordance with the requirements of TSG G0001-2012 "Boiler Safety Technical Supervision Regulations", TSG G0002-2010 "Boiler Energy saving Technical Supervision and Management Regulations", and GB/T17410 "Organic Heat Carrier Boilers", and can be supervised by the Boiler Inspection Institute

Explosion proof oil circulation heater | Explosion proof heat-conducting oil heater | Explosion proof electric heaterTypical application scenarios include:

1Heating of chemical materials in the chemical industry, drying of some powders under certain pressure, chemical processes, and spray drying.
2. Heating of hydrocarbons, including petroleum crude oil, heavy oil, fuel oil, thermal oil, lubricating oil, paraffin, etc
3. Process water, superheated steam, molten salt, nitrogen (air) gas, water gas, and other fluids that require heating should be heated.
4. Due to its advanced explosion-proof structure, the equipment can be widely used in places that require explosion-proof, such as chemical, military, petroleum, natural gas, offshore platforms, ships, mining areas, etc.

Explosion proof oil circulation heater | Explosion proof heat-conducting oil heater | Explosion proof electric heater parameters：