Electrolytic Chlorine Moisture Analyzer TMA-210-P-Ex Supplier

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The German CMC chlorine trace water analyzer TMA-210-P-Ex is used for measurement Xe、Ar、Kr、He、D2、F2、N2、H2、O2、O3、HBr、PH3、SF6、Freon、C2H2、CO2、CH4、Natural gas， Especially suitable for measuring trace moisture in high-purity acidic gases such as Cl2, HCl, SO2, H2S, and many other gases (except for a few gases that undergo chemical reactions with phosphoric acid). The measurement method does not require recalibration, and the sensor electrode film layer can be regenerated if necessary.

Product Details

German CMC chlorine trace water analyzerTMA-210-P-Ex technology features:

Suitable for moisture analysis of corrosive gases and flammable gases

Measurement method, no need for recalibration, regenerate sensor electrode film layer if necessary

Ultra fast response

high sensitivity

Fully microprocessor controlled

Automatic range switching

Instrument startup self-test function

Compliant with NAMUR standards

German CMC chlorine trace water analyzerTMA-210-P-ExAnalysis principle:

The P2O5 sensor utilizes the principle of electrolyzing water molecules into hydrogen and oxygen. This sensor consists of a glass cylinder and two parallel electrodes. The electrode material is selected according to the specific application (usually made of platinum or rhodium metal wire), and a thin layer of H3PO4 phosphate film is coated between the two electrodes. The electrolysis current that occurs between the two electrodes decomposes the water in the acid into H2 and O2. The final product of this process is P2O5, which is a highly hygroscopic substance. Therefore, water is absorbed from the sample gas. Through a continuous electrolysis process, a balance is established between the water content of the sample gas and the water content after electrolysis. The electrolysis current is proportional to the water content of the sample gas, and the signal is amplified and displayed. And read out the data. This principle is used to measure Xe、Ar、Kr、He、D2、F2、N2、H2、O2、O3、HBr、PH3、SF6、Freon、C2H2、CO2、CH4、Natural gas， Especially suitable for measuring trace moisture in high-purity acidic gases such as Cl2, HCl, SO2, H2S, and many other gases (except for a few gases that undergo chemical reactions with phosphoric acid).

German CMC chlorine trace water analyzerTMA-210-P-Ex analyzer

Range: 0~10ppm/100ppm/1000ppm/2500ppm (automatic range)

Accuracy: ± 1% of the full range

Sensitivity: ± 0.1% of the full range

Display: LCD display, backlight switchable

Alarm output: 1 alarm relay

Analog output: 1 channel 0/4~20mA or 0~10V output, users can set it through the menu

Safety barrier: Built in Zener safety barrier to ensure no overheating effect or electric spark at the measuring end

Power supply: Built in rechargeable lithium battery or external mains power of 80~230VAC/50~60Hz

Power consumption: 8W

Environmental temperature: -10 ℃~+50 ℃

Shell: Protection level IP20

Dimensions: Width 363 x Height 115 x Depth 377mm

Weight: Approximately 6Kg