Domestic testing instrument supplier

N10Bacterial endotoxin thermostat

Product Introduction

N10The bacterial endotoxin test tube thermostat is controlled by a microcomputer and uses high-purity aluminum material as the heat transfer medium, replacing traditional water bath devices. It has the characteristics of easy use, wide temperature control range, and high accuracy. It can be widely used in various biochemical sample constant temperature incubation processes such as sample preservation and reaction, DNA amplification and electrophoresis pre denaturation, serum coagulation, etc.

Since the 2000 edition of the pharmacopoeia, dry thermostats have been accepted as thermostats for bacterial endotoxin reactions. The main advantages of it compared to water bath constant temperature are:

1.Fast heating, able to rise from room temperature to 37 ℃ within 10 minutes;

2.Heating evenly to avoid inter branch differences caused by heating environment;

3.Temperature control, 37 ± 0.5 ℃, to improve laboratory proficiency;

4.Simplify experimental operations, eliminate sealing of reaction tubes, and improve experimental efficiency.

Product Features

1A simple and easy-to-use human-machine interface that displays all operational and setup information in real-time, making it convenient for users to observe the device's operating status.

2Comes with a blue transparent cover to effectively prevent sample splashing.

3. The constant temperature module is divided into four areas: A, B, C, and D, and each area can be timed independently.

4. Multiple modules are available for users to choose from, and can also be customized according to customer requirements.

5. Support automatic preheating function.

6. Support automatic power outage recovery function.

7. Support automatic startup function.

8. The instrument comes with a temperature calibration function.

9. Built in software and hardware dual over temperature protection device, making it more reliable to use.

performance metrics

Temperature control range: room temperature+5°C~110°C

Time setting: 1min~99h59min/∞

Temperature control accuracy: ≤± 0.3 ℃（@37℃）

Display accuracy: 0.1 ℃

Temperature uniformity: ≤± 0.2℃（@37℃）

Heating time: ≤ 15 minutes (25 minutes)℃Up to 100℃）

Automatic preheating: supported

Partition independent timing function: Supports

Automatic startup: Supports

Power off automatic recovery: supported

Sample capacity96 holes (2ml ampoule module) divided into four modules, each module has 24 holes

Power: 500W

Voltage specification: AC110 or 220V/50-60HZ

Fuse: 250V 3A Ø 5 × 20

Size: 370 * 254 * 178 (mm)

Weight: 8KG