-
E-mail
marketing@borche.cn
-
Phone
18922757186
-
Address
No. 9 Xinxiang Road, Xintang, Zengcheng Economic and Technological Development Zone, Guangzhou City, Guangdong Province
Product Categories
Bochuang Intelligent Equipment Co., Ltd
BU-V Two Board Intelligent Injection Molding Machine
NegotiableUpdate on 01/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The BU-V intelligent injection molding machine uses two fixed lower pull rods as the motion guide for the moving template. During the movement of the moving template, the machine frame provides support, while the lower pull rod provides guidance and auxiliary support.
Product Details
BU-V intelligent injection molding machine product features:
1. Dynamic plate locking mold, long service life of pull rod
When locking the high-pressure mold, the four tension rods are subjected to the same force, the tension rods are fixed without any bias load, and the tension rods do not break.
The pull rod passes through the interior of the locking cylinder and does not come into contact with the sealing components inside the cylinder, reducing extrusion oil leakage.
The rear locking oil cylinder is balanced with the mold to prevent forward tilting and increase the stability of the mold opening and closing.
2. Pull rod guidance, reliable guidance, and resistance to heavy loads
The Bochuang second board machine adopts two fixed lower pull rods as the motion guide for the moving template
During the movement of the template, the machine frame provides support, while the pull down rod serves as a guide and auxiliary support.
3. Intelligent interconnection
Intelligent interconnection of peripheral auxiliary equipment (chiller, mold temperature machine), robotic arms/robots and other automation devices can be achieved on the human-machine interface (computer) of the injection molding machine, realizing closed-loop control, enabling all information to communicate with each other, improving product quality, and reducing production costs
BU-V intelligent injection molding machine startup precautions:
1. Check if there is water or oil entering the electrical control box. If the electrical appliance is damp, do not turn it on Maintenance personnel should blow dry the electrical components before turning on the machine
2. Check if the power supply voltage meets the requirements, generally not exceeding ± 6%
3. Check if the emergency stop switch and front and rear safety door switches are functioning properly Verify whether the rotation direction of the electric motor and oil pump is consistent
4. Check whether each cooling pipeline is unobstructed over long distances, and introduce cooling water into the oil cooler and the cooling water jacket at the end of the barrel
5. Check if there is lubricating oil in each moving part and add enough lubricating oil
6. Turn on the electric heater and heat each section of the barrel When the temperature of each section reaches the required level, keep it warm for a period of time to stabilize the machine temperature The insulation time varies depending on the requirements of different equipment and plastic materials
7. Add enough plastic into the hopper According to the requirements of different plastics for injection molding, some raw materials are best dried first
8. It is necessary to cover the heat shield on the barrel of the machine, which can save electricity and extend the life of the electric heating coil and current contactor
Similar Product Recommend
