-
E-mail
marketing@borche.cn
-
Phone
18922757186
-
Address
No. 9 Xinxiang Road, Xintang, Zengcheng Economic and Technological Development Zone, Guangzhou City, Guangdong Province
Product Categories
Bochuang Intelligent Equipment Co., Ltd
BM multi-color machine series
NegotiableUpdate on 01/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The main injection machine and secondary injection mechanism of the BM multi-color machine series are equipped with injection screws of diameter 40 and 25, respectively. The modulus of elasticity has increased from 500mm to 550mm, and the locking structure retains the original BT150V device.
Product Details
ML series
The BM1380-200ML two-color injection molding machine series is an upgraded version of the BT standard injection molding machine series. Number BMxxx xxxML
Taking BM150-022ML as an example, the main injection machine structure and the auxiliary injection mechanism are equipped with injection screws with diameters of 40 and 25, respectively. The modulus of elasticity has increased from 500mm to 550mm, and the locking structure retains the original device of BT150V.
MV series top injection molding structure
BM200-023MV dual color injection molding machine
The code for the vertical injection station is - MV023, which will be installed on the top of the head plate. Only occupying the same floor area as a standard machine.
*Model of domestically produced (V) injection mechanism assembled on the top of the template: MV023
The first domestically produced "dual material - in mold assembly of moving parts" mold, with the demonstration product being a two-color abacus.
MP series V-shaped oblique injection structure
The main shooting platform of the MP series is located at the centerline of the template, at a 13 ° angle to the "secondary shooting platform"; The horizontal device is located behind the main shooting platform. The center distance between the two nozzles is 120mm
The first domestically produced three color injection molding machine
Model: BM150-022ML-023MV
By combining the side injection stage and top injection stage on the main machine, a three color injection molding machine is formed.
With the appropriate controller and three color mold, three material injection molding can be carried out. Taking 150 tons as an example, the three color machine number is:
BM150-022ML-023MV
Model: BM150-3C
Tri color machines are generally designed and manufactured according to the specific needs of customers.
Four color injection molding machine
*Domestic four-color injection molding machine
Model: BT260-4COLOR
By combining the side injection stage and top injection stage on the MP type host, a four-color injection molding machine is formed. With the appropriate controller and four-color mold, four-color material injection molding can be carried out.
Taking 260 tons as an example, the number of the four-color machine is BM260-100MP-022ML-023MV
Model: BM260-4C
Four color machines are designed and manufactured according to customer needs.
Multi color injection molding+in mold automation technology
In mold automation technology is the design of certain secondary processing procedures to be executed inside the mold, and plastic parts are already the final product when they leave the mold cavity. This is not a traditional automated part picking operation, but an intelligent process that integrates modern injection molding machines, advanced molds, and peripheral equipment.
The demonstration "multi-component creative production combination" is assembled by a "M260-4C four-color injection molding machine" with a "four-color in mold assembly mold" to create a four-color RP100 turntable model, whose disc and gear can rotate freely. This is the domestic "multi-color injection molding+in mold automation process", and its technical core is a four-color mold that resembles a miniature robot. It contains moving parts, hydraulic core pulling, and sensors. The four-color injection molding machine provides hydraulic power, receives sensor signals, and controls motion editing.
Four color injection molding was carried out by an injection molding machine, and seven parts were respectively formed in the mold cavity. The parts are defined as four workstations, and then a series of opening and closing molds and core pulling activities are used to perform four in mold assembly actions, intelligently assembling into a four in one RP100 activity model.
-
Flat turntable
1. For the most popular design, the process requirement of "suitable for single-sided coverage injection molding".
2. Its advantages are simple molding, low cost, and fast production.
3. Installed on the co injection molding machine, connect the hydraulic power and control circuit provided by the machine, and the turntable can be used180Reciprocating rotation.
4. There are five specifications available, suitable for injection molding machines ranging from 120 to 1000 tons, and customers can also customize their own specifications according to their needs.
5. The basic model has two sets of built-in water channels and provides water inlet nozzles on the surface.
6. Optional selectionAC SERVOServo motor transmission, capable of90°120° and180Multi angle control.
*Domestic large-diameter independent turntable
Height 2780mm, weight8ton
Model: RP2340
Model:
RP570 flat turntable, suitable for 120 and 150 ton machines.
RP700 flat turntable, suitable for 200 and 260 ton machines.
RP920 flat turntable, compatible with 320 ton machines.
RP1050 flat turntable, compatible with 400 ton machines.
RP1150 flat turntable, suitable for 500 ton machines.
RP1540 flat turntable, suitable for 1000 ton machines.
RP2190 flat turntable, suitable for 1500 ton machines.
RP2340 flat turntable, compatible with 2200 ton machine.
Core supporting turntable
1Optimize technical design, suitable forThe process requirements for "double-sided coverage" or "upper and lower penetration" injection molding.
2. In the past, only a few mold factories had the ability to manufacture pallet turning molds. Now, all that is needed is to install a set of pallet core turntables. What was once considered a difficult power structure has become a handy process.
3The central axis of the support core turntable is connected to the mold core, which can move forward to support the mold core, and then180Rotate and then return to its original position.
4. The central axis is equipped with two water transport channels to provide cooling water for the mold core. The central axis can be manufactured according to customer requirements for size.
5There are three specifications available, suitable for120to260A ton injection molding machine can also be designed according to customer requirements.
6optionalAC SERVOServo motor transmission, capable of90°120° and180Multi angle control.
Model:
TP580Core support turntable, compatible120and150Ton machine
TP700Core support turntable, compatible200Ton machine.
Core supported water transport shaft:
Two tone pen mold
Two tone ballpoint pen
SWSanwen Zhi flow channel plate
Install the sandwich channel plate on“LType "or“VOn the fixed template of the "Type" two-color machine, after installing the standard mold, the sandwich injection molding process can be achieved by controlling the double injection process and injecting synchronously or intermittently.
Core materials can be recycled or foamed to reduce costs.
Schematic diagram of sandwich injection molding
Sandwich injection molding for sandwich treatment
SW-320NSanwen Zhi flow channel plate
Mixed color injection molding
Similar Product Recommend
