Atlas of Safety Sliding Contact Line Installation for European Cranes

Crane safety sliding contact line HXPNR-H-500/800Unipolar combinationA sliding contact wire is a sliding contact wire composed of a single conductive rail, a bracket, an assembly arm, a suspension clamp, a connection box, a current collector, a fork, and other components according to the needs of the workplace. The length of a single sliding contact line is fixed at 6 meters. The sliding contact line is connected with a connection box, and each connection box can be used as an inlet for the power line.
HFD type aluminum alloy single pole sliding contact wire, conductive rail made of LD31 aluminum profile, IG18Ni9 stainless steel wear-resistant pressed into the conductive groove, and sheath (shell) made of PVC engineering plastic through hot extrusion processing.
HFDT type copper single pole sliding contact wire, with T2 conductive copper as the conductive rail, and PVC engineering plastic as the sheath (shell) processed by hot extrusion

The HFDJ type high-temperature resistant single pole sliding contact wire is equipped with an aluminum alloy profile sheath outside the sheath (shell) of the HFD type sliding contact wire, and is equipped with a corresponding high-temperature resistant connection box and suspension clamp. Mainly used in high-temperature and highly corrosive workplaces.

There are two types of bracket materials: angle steel and flat steel, which can be selected according to different models and specifications of sliding contact wires.
The HFD aluminum alloy single pole sliding contact wire has a wide range of applications, fast crane operation speed, low manufacturing cost, and the installation form of the current collector is external pressure, making replacement and maintenance convenient.

Crane safety sliding contact line HXPNR-H-500/800Model and Technical Parameters

	Serial number, model, specification, 35 ℃ current carrying capacity, 35 ℃ 100 meter DC resistor, 35 ℃ 100 meter AC resistor, center distance between poles (mm), collector matching model: 1HFD2002000.0230760.0191985JDD1602HFD2502500.0184610.1535 3HFD3003000.0154210.01426 Sliding contact wire can be made into curved wire with a radius greater than 2 meters
	Serial number, model, specification, 35 ℃ current carrying capacity, 35 ℃ 100 meter DC resistor, 35 ℃ 100 meter AC resistor, center distance between poles (mm), collector matching model: 1HFD320030.0144230.0132385JDD240 JDD350 2 HFD5005000.0103810.0098483HFD6306300.0087870.0085494HFD8008000.0069280.0067335HFD100010000.0043780.0043196HFD120012000.0031200.003095

It is composed of H-shaped aluminum alloy body guide rail pressurized V-shaped stainless steel sliding belt, PVC insulation shell, external collector, suspension, fixing and other components. This product is widely used in situations with high current, high frequency of use, fast operating speed, and poor environmental conditions due to its innovative design, reasonable structure, easy maintenance, and safe use.