08,13,2026 16 views
The customer in this issue uses the LSDP-63C joint plastic machinePVCHigh speed dual tube production line, with pipe diameters covering Ø 16-Ø 63mm, production speed of 25m/min, output of 350-400kg/h, from extrusion front-end measurement to back-end forming and cutting, the entire line configuration focuses on "high speed, stability, and high yield".
High speed production, starting with precise feeding
This case is accompanied by 4 sets of MaikangweiLoss-in-weightThe system is used to measure main materials, crushed materials, corner materials, and colorants. The addition ratios of each component are set according to the production formula to achieve synchronous cutting of multiple materials and support online color changing. Multi component synchronous measurement, precise matching of cutting speed and extrusion rhythm, providing reliable material guarantee for high-speed and stable operation of the entire line.
High speed stable extrusion, double tube synchronous molding
The extruder adoptsParallel twin screwExtruder, designed for the characteristics of CPVC materials and high-speed extrusion conditions, achieves stable conveying, sufficient plasticization, and uniform mixing through a reasonable combination of screws, while also considering extrusion pressure and melt
For pipe production, high speed can achieve efficiency improvement, but it requires a high yield rate and low maintenance rate. The whole line configuration focuses on the coordination between the front and rear ends of extrusion, synchronously matching each link from metering, extrusion, vacuum forming, traction, and cutting.
