Zhangjiagang Huade Machinery SRL-Z500/1000 high-speed mixing unit, plastic PVC mixing machine, mixer

NegotiableUpdate on 03/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product time: March 10, 2016 Brief description: The 500/1000 mixer unit is mainly used for various plastic batching, mixing, drying, coloring and other processes. It is an ideal equipment for profile and pipe manufacturers. In the 500/1000 mixer unit, the material is mixed at high speed by hot mixing and then enters cold mixing. It is then cooled and stirred to prevent the degradation and agglomeration of the hot mixed material, allowing the additives in the hot mixed material to continue to infiltrate, eliminating residual gases in the hot mixed material, and storing the hot mixed material. Zhangjiagang Huade Machinery SRL-Z500/1000 high-speed mixing unit, plastic PVC mixing machine, mixer

Product Details

500/1000Mixing machine unit

Zhangjiagang Huade Machinery SRL-Z500/1000 high-speed mixing unit, plastic PVC mixing machine, mixer

1.Screw feeding machine

Main technical parameters:

1.Motor Power	2.2KW
2.structural style	Screw feeding
3.material	stainless steel

2.500/1000Mixing machine unit

Main technical parameters:

Zhangjiagang Huade Machinery SRL-Z500/1000 high-speed mixing unit, plastic PVC mixing machine, mixer

1High mixing section
Total volume/effective volume	500/375L
Mixing slurry quantity	3Divided into 3 layers, allowing the material to circulate and flip up and down while moving along the pot wall;The upper part of the inner wall of the bucket is equipped with a guide plate to enhance the mixing effect. Its guide angle can make the material roll inside the bucket, and the blades make the overall equipment smoother through dynamic balance.
Mixing speed of slurry	430/860rpm
Heating method	Electric heating or self friction
mixing time	8-12Divide/Pot
electrical machinery	75KWMotor (Siemens brand)
frequency converter	Zhejiang Jiale brand
material	The pot lid and tee are made of cast aluminum, while the inner pot and propeller blades are made of high-quality stainless steel
Barrel wall thickness	5mm
head	6mm
seal	Main shaft oil seal inlet, pot cover sealing with fluorine rubber
2Cold mixing section
Total volume/effective volume	1000/640L
Mixing slurry quantity	1pay
Mixing speed of slurry	100rpm
Cooling method	The water-cooled cooling medium is tap water with a pressure greater than 0.1Mpa, with a cooling material temperature of 40-60 ℃ and a cooling water temperature of 0-15 ℃
Cooling time	8-10minute
electrical machinery	15kw
material	The pot lid and tee are made of cast aluminum, while the inner pot and propeller blades are made of high-quality stainless steel. The wall thickness of the barrel is 5mm, and the wall thickness of the pot bottom is 8mm
3Electrical components
Vertical electrical control box	1only
Use power supply	380V 50Hz
air source	Compressed air 0.39-0.49Mpa
AC contactor	schneider
Temperature control meter	Omron

Zhangjiagang Huade Machinery 500/1000 high-speed mixer

Welcome to visit the factory, Xiao Cai. You can confirm the price and configuration with me later