-
Phone
13862233698
-
Address
No. 199 Fumin Middle Road, Tangqiao Town, Zhangjiagang City, Suzhou City, Jiangsu Province
Product Categories
Zhangjiagang Yijiu Machinery Co., Ltd
YJH60-5L fully automatic single station blow molding machine
NegotiableUpdate on 08/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Scope of application:
Product Details
YJH60-5L fully automatic single stationblow molding machineIntroduction:
YJH60-5L fully automatic single station blow molding machine is used to spray liquid plastic out, and then use the wind force blown out by the machine to attach the plastic body to a certain shape of mold cavity, thereby producing products. The fully automatic blow molding machine can blow hollow containers with a capacity ranging from 1L to 5L using thermoplastic materials such as PE and PP as raw materials, such as cosmetic containers, beverage containers, etc. Blow molding machine equipment is fully automated in production, with high energy saving, low noise, fast speed, high efficiency, safety and reliability.
YJH60-5L full-automatic single station blow molding machine can replace different double die heads, the third mock examination heads and four die heads to produce hollow products with multiple specifications and small capacity, improve output and reduce energy consumption. Blow molding machines can add functions such as liquid level lines to enrich product packaging requirements.
YJH60-5L fully automatic blow molding machine products
Technical parameters of YJH60-5L fully automatic single station blow molding machine equipment:
| Technical Specifications | UNIT | YJH60-5L |
| Maximum product volume | L | 5 |
| workstation count | - | Single |
| Applicable raw materials | - | PE,PP |
| idle loop | PCS/H | 1100 |
| screw diameter | MM | 60 |
| screw length-to-diameter ratio | L/D | 25 |
| Screw motor power | KW | 15 |
| Screw heating power | KW | 8.1 |
| Number of screw heating sections | ZONE | 3 |
| HDPE extrusion volume | KG/H | 60 |
| Oil pump motor power | KW | 7.5 |
| clamping force | KN | 70 |
| Move mold stroke | MM | 420 |
| Type of mold head | Continue Die Head | |
| Opening and closing stroke of the mold | MM | 220-700 |
| Template size | W x H(MM) | 350 x 425 |
| Maximum size of mold | W x H(MM) | 350 x 425 |
| Maximum die diameter | MM | 150 |
| Heating power of mold head | KW | 2.5 |
| Number of heating sections | ZONE | 3 |
| blowing pressure | MPA | 0.6 |
| Gas consumption | M3/MIN | 0.5 |
| cooling water pressure | MPA | 0.3 |
| water consumption | L/MIN | 50 |
| Machine dimensions | L x W x H(M) | 3.0 x 1.7 x 2.5 |
| machine weight | TON | 4.8 |
Due to the continuous advancement of blow molding machine equipment technology, the above data may be updated without prior notice!
Similar Product Recommend
