-
Phone
13862233698
-
Address
No. 199 Fumin Middle Road, Tangqiao Town, Zhangjiagang City, Suzhou City, Jiangsu Province
Product Categories
Zhangjiagang Yijiu Machinery Co., Ltd
YJBA90-60L fully automatic energy-saving blow molding machine
NegotiableUpdate on 12/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Scope of application:
Product Details
YJBA90-60L Fully Automatic Energy saving Typeblow molding machinePerformance characteristics:
YJBA90-60L fully automatic energy-saving blow molding machine is a fully automatic energy-saving blow molding machine equipped with an 8L storage type die head;
Suitable for producing products with a capacity of less than 60L, especially oil drums, seafood drums, conical drums, plastic models, etc;
The two pull rod pressurized locking structure provides a stable locking structure with even force distribution, increasing the service life of the template.
The blow molding machine adopts high-quality linear guide rails, with fast opening and closing speed, low energy consumption, and high equipment output.
YJBA90-60L fully automatic energy-saving blow molding machine equipment technical parameters:
| YJBA90-60L fully automatic energy-saving blow molding machineTechnical Specifications | UNIT | YJBA60-10L |
| Maximum product volume | L | 60 |
| Applicable raw materials | - | PE,PP |
| Empty cycle | PCS/H | 500 |
| screw diameter | mm | 90 |
| screw length-to-diameter ratio | L/D | 25 |
| Screw motor power | Kw | 37 |
| Screw heating power | Kw | 21 |
| Number of screw heating sections | Zone | 4 |
| HDPE extrusion volume | Kg/h | 140 |
| Oil pump motor power | Kw | 18.5 |
| clamping force | Kn | 350 |
| Opening and closing stroke of the mold | mm | 500-1200 |
| template size | W×H(mm) | 950×900 |
| Maximum size of mold | W×H(mm) | 700×900 |
| Type of mold head | Accumulator die head | |
| Storage capacity | L | 8 |
| Maximum die diameter | mm | 320 |
| Heating power of mold head | Kw | 17 |
| Number of heating sections | Zone | 4 |
| blowing pressure | Mpa | 0.6 |
| Gas consumption | M3/Min | 1.0 |
| cooling water pressure | Mpa | 0.3 |
| water consumption | L/Min | 85 |
| Machine dimensions | L×W×H(M) | 5.1×2.5×3.9 |
| machine weight | Ton | 5.2 |
Due to the continuous advancement of blow molding machine equipment technology, the above data may be updated without prior notice!
Similar Product Recommend
