YG type pipeline oil pump

The Heshan brand YG type pipeline oil pump is mainly used for pipeline boosting, long-distance transportation of gasoline, kerosene, diesel, aviation oil and other oils, and can also transport other non corrosive liquids

Product Features

Its structural characteristics are
1. The YG type pipeline oil pump is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in the pipeline like a valve, with a compact and beautiful appearance, small footprint, and low construction investment. If a protective cover is added, it can be used outdoors.
2. The impeller is directly mounted on the extended shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth pump operation and low vibration noise.
3. The shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials and wear-resistant seals, which can effectively increase the service life of the mechanical seal.
4. Easy installation and maintenance, no need to disassemble the piping system, just remove the pump coupling nut to extract all rotor components.
5. YG type pipeline oil pump can be operated in series or parallel according to the requirements of flow rate and head.
6. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.

II Other precautions
1. The suction pressure is ≤ 1.0MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa. The static pressure test pressure of the pump is 2.5MPa. Please specify the system working pressure when ordering.
When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that cast steel materials can be used for the overcurrent and connection parts during manufacturing.
2. The ambient temperature is less than 40 ℃ and the relative humidity is less than 95%.
3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be greater than 0.2mm.

Note: If the medium used is with small particles, please specify when ordering so that the manufacturer can use wear-resistant mechanical seals.

Product Usage

This pipeline oil pump is suitable for oil depots, gas stations, chemical, mining, petrochemical, enterprises and institutions, etc.

performance parameters

YG type pipeline oil pump detailed performance parameters