Wholesale sales of metal drag chains

TLThe main body of the series of steel drag chains is composed of chain plates (high-quality steel plate chrome plated), support plates (extruded aluminum alloy), shaft pins (alloy steel) and other components, which prevent relative movement and distortion between the cable or rubber tube and the drag chain. The chain plate is chrome plated with a novel appearance, reasonable structure, high flexibility and strength, good rigidity, easy installation, reliable use, and easy disassembly and assembly. Especially, this product adopts high-strength wear-resistant materials, alloy copper as the shaft pin, which improves the wear resistance strength of the product, makes bending more flexible, reduces resistance, reduces noise, and ensures long-term use without deformation or sagging.

Several points must be noted when using steel drag chains:

1.TLGThe maximum travel of TL type steel drag chain is 40 meters, suitable for all transmission modes. Can be extended or shortened at will. In addition, the bending radius can be changed by changing the pin axis. The bending radius should be selected according to the maximum diameter of the cable and should reach 10 times the diameter of the cable. For smaller strokes, a smaller radius can be selected accordingly

2.The width of the support plate for steel drag chains ranges from 150mm to 800mm, with a spacing of 10mm between holes. The height of the chain plate, which is also the height of the support plate, is determined by the maximum diameter of the cable

3.When the machine tool is operating at its maximum limit, if the width of the steel drag chain exceeds 300mm and the length of the drag chain exceeds 4m, for stability reasons, it should be considered to choose a drag chain with a size one larger.