-
E-mail
2662391910@qq.com
-
Phone
13825204819
-
Address
628-629, Building F, Digital Silicon Valley Yuanshan Industrial Park, Yuanshan Street, Longgang District, Shenzhen
Product Categories
Shenzhen Outite Technology Co., Ltd
Wholesale of oxygen detectors
NegotiableUpdate on 01/16
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The fixed ADT800W oxygen detector product is widely used in various fields such as petroleum, chemical, metallurgical, power, municipal, fire protection, industrial production, university research experiments, and exhaust environmental monitoring.
Product Details
Product Model: ADT800W-O2
Product Name:Fixed ADT800W Oxygen Detector
Product description：
ADT800WFixed ADT800W Oxygen DetectorIt is a gas detector newly created by Outit Technology on the basis of the original, using * sensors and a new 32-bit low-power processor; The dashboard display interface displays both numerical values and progress bars, presenting a beautiful and elegant appearance; The circuit adopts 4-layer wiring, which has stronger resistance to weak signals and interference; Independent high-precision imported 16 bit AD chip and * signal processing algorithm, with higher and more stable measurement data accuracy; 4~20mA, RS485, 200~1000HZ multiple output signals can be selected, making it easy to connect to various alarm controllers, PLCs, DCS and other control systems; Explosion proof structural design can be applied in various hazardous industrial sites; The product is widely used in various fields such as petroleum, chemical, metallurgical, power, municipal, fire protection, industrial production, university scientific research experiments, and exhaust environmental monitoring.
Technical Specifications:
name |
description |
Gas detection: |
Oxygen O2 |
Detection principle: |
Principles of electrochemistry |
Detection method: |
Fixed online continuous detection and diffusion detection methods; |
Fixed online continuous detection, using an external air pump to achieve pump suction flow detection (optional air pump); | |
Installation method: |
Wall mounted, pipelineIntegrated (Pipe type external thread specification: M45X1.5mm, optional pipe adapter screw joint, weldable) |
Measuring range |
01000ppm、5%VolThe25%Vol、30%Vol、*Vol(The measurement range is optional at the factory, and if the range is not listed, it can be customized) |
resolving power: |
1ppm,0.01%VOL |
Accuracy: |
≤± 1% FS (actual concentration, higher accuracy requirements depending on sensor performance) |
Operation method: |
Infrared remote control for remote and close range operation, convenient setup |
Repeatability: |
≤±1% |
Zero drift: |
≤± 1% (F.S/year) |
Response time: |
≤ 20 seconds (T90) |
Recovery time: |
≤ 20 seconds |
Explosion-proof mark: |
Exd II CT6 |
Protection level: |
IP66 |
|
Output signal: |
Users can choose according to their actual on-site environmental needs, with a maximum transmission distance of 2000 meters (single core 1mm2 shielded cable) |
Three wire 4-20mA current signal output, can be connected to various control systems such as alarm controllers, PLCs, DCS, etc. (standard configuration) | |
Digital signal RS-485 output,ModBus RTU communication protocol（Optional features) | |
Frequency signal 200~1000Hz output (optional function) | |
Two sets of relay outputs: passive electric shock capacity 220VAC 0.5A or 5VDC 0.5A | |
Remote transmission and status alarm of detection data can be achieved through wireless module function (optional function); Can achieve Ethernet access | |
Main material |
Shell: ADC12 aluminum alloy, sturdy, wear-resistant and corrosion-resistant (batch can choose 316 stainless steel shell) |
Gas chamber: Made of high-strength, wear-resistant, and corrosion-resistant aluminum profiles, sturdy and durable (316 stainless steel gas chambers can be optionally selected for batches) | |
Operating Temperature |
-30 ℃~+60 ℃ (customized for special requirements) |
Working humidity: |
≤95%RH， No condensation (humidity>90% RH, condensation can be equipped with a filter) |
relative humidity |
10%～95%RH |
Power supply: |
24VDC (normal operating voltage range 12-30VDC) |
Power consumption: |
1.5W |
working pressure: |
≤200Kpa |
Size: |
180mm * 140mm * 92mm (height * width * thickness) |
Weight: |
About 1.6Kg |
Execution standard: |
GB15322.1-2003，GB3836.1-2010，GB3836.2-2010，GB3836.4-2010 |
Standard configuration: |
Host, remote control, packaging box, manual, warranty card/certificate of conformity |
*： |
The whole machine comes with a one-year warranty and free maintenance during the warranty period. |
