Wholesale of low-speed room temperature centrifuge

The casing of the desktop low-speed centrifuge adopts a fully steel shell with a built-in protective steel sleeve, which is simple, compact, lightweight, and has low noise; Stainless steel chamber, sturdy construction, suitable for continuous use, inflatable spring, easy to open lid, automatic locking lid ensures safety; Equipped with door cover protection, overspeed and electronic imbalance detection system, it can monitor the centrifuge process in real time and ensure the safe operation of the instrument.

Instructions for using a desktop low-speed centrifuge:

Firstly, add the substances to be separated into the centrifuge tubes and insert them into the centrifuge core (rotor) holes. The substances added to each centrifuge tube should be roughly equal. Close the cover plate, connect the power supply, turn on the switch, and the power indicator light will be on. Then select the desired centrifugation working time and speed, and choose the appropriate position according to your needs. At this point, the centrifuge will enter the working state.

Desktop low-speed centrifuge operates with low overall noise, easy operation, safety and reliability

Precautions for using a desktop low-speed centrifuge:

1. The swivel head should be fixed in the accurate position, the fixing screws should be tightened, whether there are cracks or corrosion in the swivel head and other accessories, and the contact of the ground wire.

2. Independent sockets must be used to ensure stable voltage; If the user's voltage is unstable, a regulated power supply must be connected to avoid damaging the centrifuge; The desktop low-speed centrifuge should be placed on a sturdy, stable, and horizontal tabletop, with a certain amount of space around the chassis and good ventilation maintained.

3. After each use, the lid should be opened, the condensed water wiped off, and then naturally dried; Before and after centrifugation, the rotor must be gently lowered or lifted vertically to avoid colliding with the shaft and rotor.

4. After using the centrifuge rotor, basket, casing, etc., they should be wiped dry and placed separately.

During the centrifugation process, if the glass tube breaks, the debris in the centrifuge chamber, casing, and other areas should be cleaned up, otherwise it will damage the centrifuge.

6. Regularly use a vacuum cleaner to remove dust from the cooling fins located at the rear of the centrifuge.

If the bricks of the low-speed centrifuge are found to be corroded or cracked, they should be replaced immediately. And it is necessary to regularly maintain the rotor, basket, and casing with specialized varnish to avoid corrosion, and lubricate the shaft, basket ears, and other parts with lubricating oil.

Introduction to desktop low-speed centrifuge:

1. Microcomputer control, DC brushless motor drive, stable operation, low noise, high speed accuracy;

2. Programmable operation, host operating parameters can be automatically stored according to requirements;

3. LCD screen display, user-friendly interface, simple and convenient operation;

4. Real time conversion and setting of readings between RPM/RCF, convenient and fast;

5. Equipped with electronic door locks, multiple protection functions such as door cover protection and overspeed, automatic fault alarm function, safe and reliable; The mouth button touch bidirectional operation is simple and convenient to operate;

6. Reserved USB interface for easy data extraction.

7. Model: MD-550

8. Support power supply: Ac220V 50Hz 5A

9. Total power: 0.75kw

10. High speed: 5500r/min

11. Maximum relative centrifugal force: 5370xg

12. Timing range: 0~99H59min

13. Maximum capacity: 4X 250ml

14. Whole machine noise: ≤ 62dB (A)

15. Speed accuracy: ± 20r/min

16. Centrifugal chamber diameter: Φ 420mm

17. Dimensions (length X width X height): 560X 440X 350mm (LxWx H)

18. Net weight: 42kg