Wholesale of explosion-proof distribution boxes

BXMD51/53-T6KExplosion-proof distribution box
Scope of Application
1. Suitable for hazardous gas locations in Zone 1 and Zone 2;
2. Suitable for explosive gas or steam environments in Class IIA, IIB, IIC T1-T6 groups;
3. Suitable for indoor and outdoor use (IP54, IP65 *)
4. Suitable for places with combustible dust;
5. Suitable for explosive hazardous environments such as oil extraction, storage, chemical, pharmaceutical, textile, printing and dyeing, and military facilities;
6. Power distribution for lighting or power lines;
BXMD51/53-T6KExplosion-proof distribution boxProduct Features
1. Aluminum alloy shell is die cast, surface sprayed with plastic, and has a beautiful appearance;
2. Equipped with C65N, NC100H, and S25 □ S high breaking miniature circuit breakers, M611 or GV2 motor protectors, 3VE1 air switch CM1 molded case circuit breakers, and signal lights;
3. It has overload and short circuit protection functions;
4. Modular structure, various circuits can be freely assembled according to user needs;
5. It can be customized according to user requirements, such as installing surge protectors, ammeters, voltmeters, etc;
6. Steel pipe cargo cable wiring;

BXMD51/53-T6KExplosion-proof distribution boxTechnical Specifications
Execution standards: GB3836.1, GB3836.2, GB12476.1, IEC60079-0, IEC60079-1
IEC61241-1、EN60079-0、EN60079-1、EN61241-1
Explosion proof signs: Exced Ⅱ BT6 Gb, DIPA21 TA, T6 Exced Ⅱ CT6 Gb, DIPA21 TA, T6
Rated voltage: 220V/380V
Rated current: 10A
Usage category: ZC-15, DC-13
Protection level: IP65
Anti corrosion grade: WF1 * WF2
Internal components: buttons, electricity meters, indicator lights, switches
Inlet thread: G1 "inlet specification
Cable outer diameter: suitable for cables ranging from 12mm to 20mm in diameter
Installation methods: hanging, vertical
Installation and Usage
Before installing and using the product, check whether the technical data on the nameplate matches the usage situation;
5.2 Before installation and maintenance, the front power supply must be cut off;
5.3 The incoming and outgoing cables pass through the rubber sealing ring, and are tightened with washers and compression nuts to ensure that the seal and cable are not loose;
During use, if the sealing ring experiences corrosion, brittle cracking, deformation, sticking, or changes in hardness exceeding 20% of its original value, it should be promptly purchased and replaced from the manufacturer to ensure reliable explosion-proof performance;
During maintenance and disassembly, be careful not to bump, scratch, or corrode the explosion-proof surface, and regularly apply 204-1 anti rust oil;
5.6 The distribution box should be regularly inspected during use to ensure its good operation;
5.7 Non professionals are strictly prohibited from opening the cover for maintenance and inspection.