Which is good for DC electronic loads

Zhimao Programmable DC Electronic LoadMODEL 63600Series Product Introduction

63600 Series of DC electronic loads, mainly for supplyA/DPower supply unitD/DTesting and use of converters, chargers, batteries, server power supplies, and some power electronic components. In addition, for applications such as R&D departments, product mass production, and some incoming inspection,63600 All of them can demonstrate their excellent performance.

63600 applyDSPThe new technology has developed a fixed impedance(CZ)Operation mode, which can simulate the actual tensile load conditions of nonlinear loads.

63600 Series can operate at low voltage(0.4V)Pull down its rated current. This feature isPoint-of-LoadofD/DIn terms of testing and fuel cell testing, it still maintains its load capacity.63600 The series can be programmed with load current level and current ramp rate/Decline rate, duration, andVonSimulate a wide range of dynamic load applications using functions such as point voltage.63600 There is also an automatic frequency conversion dynamic scanning function(Namely, load simulation at different frequencies)to satisfyATXThe demand for power supplies. Furthermore, it also provides100 The storage function of the group and the ability to call the user's stored settings at any time. In automated testing, this storage and calling function can shorten testing time.

63600 Integrated with real-time and accurate voltage and current measurement functions, each module has three file bits and a resolution of up to 16 Position. Users can perform real-time voltage measurement and adjustment online, and also use the buttons on the front panel for short-circuit simulation testing. Through the front panelVFDThe monitor and knob can be used to63600Simple operation and setting can be done on the series of electronic loads, making it easier to useEthernetTheUSBandGPIBWait for the interface for remote control.

63600 It also includes routine self diagnosis function, protection against overvoltage, overcurrent, and overtemperature, as well as overvoltage alarm. In addition, it provides positive and negative polarity reverse connection alarm and protection function, which can ensure better protection 63600 The quality and reliability of the series.

feature

■ power range: 100W x 2 (dual-channel)，

300W & 400W

■ voltage range:reachable600V

■ can be equipped with 5 A module,reach2000WLoad modulereachable400W

■ Single shelf reachable 10 A channel

■ Low voltage operation characteristics0.4V @ 80A(Typical)

■ Constant current, constant resistance, constant voltage, and constant power operation modes

■ Fixed impedance(CZ)Mode simulation of capacitive load startup

■ Parallel mode provides high current and up to2kWHigh power

Zhimao Programmable DC Electronic LoadMODEL 63600seriesapplication

■ Multi channel synchronous timing control

■ Gundam50kHzAutomatic frequency conversion dynamic scanning(Sweep)

■ Real time simulation of load instantaneous response and voltage peak of power supply(Vpk+/-)measurement

■ User defined waveform

■ Can be programmed directly through the front panel 100 Group timing and load values

■ High precision voltage and current measurement

■ High speed and precise digitization(Digitizing)measurement/Data extraction

■ Overcurrent of the test object/Voltage, current, and power points during overload protection(Pmax)Measurement of protection points

■ Time measurement

■ Short circuit simulation

■ Self diagnosis upon startup

■ protection function:Overcurrent, Overpower, Overtemperature Protection, and Overvoltage Alarm

■EthernetTheUSBTheGPIBinterface