Which is a good supplier of comprehensive testing system for AC charging gun stations

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The comprehensive testing system for communication charging gun/pile is suitable for testing and verifying the charging conduction function of national, European, and American charging gun/pile standards, and can be widely used in research and development design as well as production and factory testing.

Product Details

Comprehensive testing system for communication charging gun stationsIntroduction:

This deviceSuitable for national standard, European standard, and American standard charging guns/The charging conduction function testing and verification of pile standards can be widely used in research and development design, as well as production and factory testing.

Comprehensive testing system for communication charging gun stationsDetails:

1. Overview:

According to the new national standardIEC/EN 61851, IEC 62196-2-2016, GB/T 18487.1-2015, SAE J1772-2017, iccpd are automated intelligent testing and inspection systems specially developed based on standards such as IEC/EN 62752. This testing system is suitable for testing and verifying the charging conduction function of national, European, and American charging gun/pile standards, and can be widely used for research and development design as well as factory testing.

Equipment features: The control panel is designed according to ergonomics The system software has one click testing, flexible configuration of testing process parameters, and all test results can be recorded and queried. It also has QR code scanning function, which can trace product testing data, connectable MES system.

2、 Technical parameters

Applicable product: Charging gun/Charging station、Single phase and three-phase productsTesting standards: National Standard/European Standard/American Standard；Suitable for mode 2 and mode 3 products；

Working voltage: single-phase AC 0~300V three-phase AC line voltage 0~420V continuously adjustable;

Load current:1~40A continuously adjustable;

Testing station:1 workstation

3、 Test project

serial number	Test category	test project	remark
1	Safety Compliance Testing	Dielectric strength test
2	Safety Compliance Testing	Insulation resistance test
3	resistance test	PE conduction resistance test
4	resistance test	Gun head resistor
5	Static power consumption test	Standby power consumption test
6	Relay adhesion test	Relay adhesion monitoring test
7	Charging interoperability testing	Connection Confirmation Test
8		Charging readiness test
9		Start up and charging phase testing
10		Normal charging end test
11		Charging connection control timing test
12		Control guidance test(Frequency/duty cycle/rise/fall, etc.)
13		CC disconnection test
14		CP disconnection test
15		CP grounding test
16		Continuity loss test of protective grounding conductor
17		Output overcurrent test
18		Disconnect the switch S2 test
19		CP circuit voltage limit test
20	Functional protection testing	Grounding protection test
21		Overcurrent protection test(One stage overcurrent/Two stage overcurrent)
22		Undervoltage protection test(Undervoltage protection/undervoltage recovery)
23		Overvoltage protection test(Overvoltage protection/overvoltage recovery)
24		Leakage protection test(AC type leakage)
25	Other tests	Indicator light test
26		output L/N/PE line sequence conductivity test
27

Note:The above testing items are for reference only and are based on the actual needs of the customer

Note: Compatible with national standards/European Standard/American Standard Mode II Mode III

5、 System parameters

serial number	Name Category	Electrical parameters	remark
1	Rated input	Three phase four wire input 380V ±10% 50/60Hz ±5%
2	rated output	Three phase four wire output resolution0.1V32Resolution 0.1A High end（0.0V～300.0V） resolution0.1V32Resolution 0.1A
3	load	three-phasefeedback load，1~32Resolution 0.1A
4	Measurement accuracy	Voltage, current, power Measurement accuracy ≤1%
5	Insulation withstand voltage test	ACW:0-5000V/12mA DCW:0-6000V/6mA IR:0-1000V/9999MΩ
6	Power supply and charging interface	National Standard/European/American standard socket/gun holder
7	industrial computer	Intel I3 3rd generation 4+256G includes wireless keyboard, mouse, USB wireless network card
8	scanner	USB port
9	size	About high 1850mm * width750mm * Depth1350mm

softItem parameters:

The system software has one click testing, and all test results can be recorded and queried. It also has QR code scanning function and can be used for product testing

Traceability of test data, the control panel is designed according to ergonomics The device can perform self inspection.

The operating software adopts a Chinese interface, which is simple and easy to learn;

Computerized operation, all tests completed in one go

can be paired with MES System connection

Scan code test

After testing, it can be printed

Test data traceability

Test data can be automatically saved as EXECLDocuments and the ability to print data reports for a single product