Which is a good steel drag chain

Application of Shandong Cable Steel Tank Chain Products

Generally used for traction and protection on cables, oil pipes, air pipes, water pipes, and air ducts in machine tools and machinery. The application of steel tank chains
In the morning, it originated from Germany, and later it was cited and innovated domestically. Nowadays, steel tank chains are widely used in machine tools, protecting cables and making the overall appearance of the machine more beautiful. Tank chains, rectangular metal hoses, protective covers, corrugated pipes, and plastic coated metal hoses are all classified as cable protection products. Steel tank chains are divided into three types based on their application environment and needs: bridge type steel tank chains, fully enclosed steel tank chains, and semi enclosed steel tank chains.

Shandong Cable Steel Tank Chain ProductsSelection criteria

1. Determine the height of the chain plate, Hg, based on the maximum aperture Dma of the support platecable carriertype

2. The aperture of the inner cavity of the support plate D1=d is approximately equal to 0.1d (take an integer). Among them, d=the outer diameter of wires, cables, liquid and gas hoses.

3. Determine the support plate type based on the functional requirements of the tank chaincable carrierThe radius of curvature:

1) When the standard of the pipe joint of the cable is larger than the inner hole diameter of the support plate or requires frequent disassembly, repair, etc., a separate type support plate can be selected;

2) When the tank chain needs to bear large pipe and cable loads, high-strength support plate type - integral type should be selected;

3) When there are many standard varieties of equipment cables, frame type support plates can be used.

4. When the application of machine tool tank chains is limited by conditions or affected by the environment, steel strip protective support plates need to be selected.

5. Select the width b1 of the support plate based on the number of equipment cables, and then determinecable carrierWidth B.

Shandong Cable Steel Tank Chain Product Plan

The main body is composed of components such as chain plate (high-quality steel plate chrome plated), support plate (extruded aluminum alloy), shaft pin (alloy steel), etc., so that there is no relative movement between the cable or rubber tube and the tank chain, and no misunderstanding deformation occurs. The chain plate is treated with chrome plating, with a novel and reasonable appearance, high active strength, no steel deformation, convenient equipment, reliable use, easy disassembly and assembly, especially the use of high-strength wear-resistant materials, alloy copper as the shaft pin, which improves the wear resistance of the product, makes it more flexible, has less resistance, reduces noise, and can ensure long-term use without deformation or sagging.

1. Tank chains can move at a maximum speed of 40 meters per minute.

When the tank chain moves at its maximum speed, the noise pressure level should not exceed 68 decibels.

3. The safe service life of tank chains shall not be less than 1 million times (reciprocating).

Shandong Cable Steel Tank Chain Product Standard

According to structure, it can be divided into TL type steel tank chains and TLG type steel tank chains. Steel tank chains are classified by pitch into 45, 65, 75, 95, 100, 125, 180, 225, and 250 types. The width of the tank chain can be customized according to user needs, with a bending radius ranging from 50-800. There are three ways to support the board. (1) When the tank chain needs to bear a large load of pipes and cables, a high-strength support plate - integral type (2) should be selected. When the pipe joint standard of the pipe cable is larger than the inner hole diameter of the support plate or requires frequent disassembly, repair, etc. When there are many standard varieties of equipment cables, the support plate frame type can be selected.