Which is a good soaking device for charging gun insertion and removal lifespan

Charging gun plug-in life soaking deviceIntroduction:

This devicesuitUsed for independent workoneaCharging gun charging dockofmechanical lifeexperimentThis testing machine adopts servo technologyElectric cylinders, servo modules, cylinders, etcFor power，Using compact fixturesClamp the sample，genuine10Inch color touch screen and original packagingJapanProgrammable controller（PLC serves as the control center, with excellent performance, easy operation, and high degree of automation.Can hold the charging gun, automatically soak the charging gun in solution or mud for a period of time, and then automatically take it out and insert it into the charging gun holder. Repeat this action to simulate the plugging and unplugging life of the charging gun outdoors.

Charging gun plug-in life soaking deviceDetails:

1Meet the standards:This device complies withRNDS-B-20091 v1.0 attachment10.6.1and10.6.2ofAction testingwantRequest;

2Main technical parameters:

1)driving device∶Electric rod, module, cylinder

2)Device structureThe experimental device is placed horizontally and welded with a national standard 60mm x 60mm square tube skeleton. The sealing plate is made of 1.2Mm Baosteel ElectricsolutionCNC machining and forming of boards.

3)controllerThe system adopts10Inch touch screen and programmable controller（PLC) The operation of logical intelligent control devices. All experimental parameters can be stored and directly called when reused, without the need to reset them again. The operation is simple and easy to use, greatly improving efficiency.

4)scope of competenceCan meet all 2p requirements+E、3P+E、3P+E+N and other specificationsproductRated AC current≤250AOr direct current≤250ATesting of socket (plug) products,

5)action speedThe insertion and extraction speed of the plug or connector is (0.1)~0.80）M/S can be set arbitrarily to meet the standard requirement of 0.8±0.1) Requirement of m/s

6) Test speedThe rate of inserting and unplugging a plug or connector from a socket or appliance input socket is 7.5 strokes per minute

7)manual adjustmentThe system is equipped with a manual condition button, which facilitates the clamping of samples

8)drive systemUsing servo motor drivemoveBall screw rotation andsoundThe slide rail is used as a guide to make the fixture move back and forth left and right, which can providebig1000The insertion and pulling force of N,The clamp has a rotating function and can place the sample horizontally or vertically into the solution.

9)have4 buckets, each 500 * 500 * 400mm high, can hold 4 different solutions or slurries, the module can automatically drive the charging gun to soak different solutions

10)You can set the number of times to test each solution and automatically cycle to soak different solutions.

11)Insertion and extraction process∶0~300mm arbitrary setting (i.e. the stroke of the left fixture driven by the servo motor),distinguishrate0.1mm∶

12)fixture spacing∶Max150mm， Meet the requirement of 'two electrical appliances should be separated by at least 50mm':

13)Fixture baseA linear sliding rail is used on both the upper and lower sides, both inside and outside, to ensure the straightness of the fixture during operation and the strength of the guiding structure.

14)three-phaseinsertThe clamping range of the head socket and connector fixture is square150mm x 150mm, circularφ150mm;

15)The central holding range of single-phase plug sockets and connector fixtures is square110mm10mm， rotundityφ10mm∶

16)The plastic shell sample fixture is made of metalcliptool；

17)Testing station:1 independent workstation

18)number of trials∶1~999999 arbitrary settings, automatic shutdown when the count reaches the set value:

19)Product soaking time:1~9999s can be set;

20)Charging gun insertion time:1~9999s can be set;

21)alarm detectionFollowing the principle of 'always turn on when necessary, always turn off when necessary', the system determines whether the sample is damaged based on the logical relationship between 'position and current'. When the tested sample is damaged, the equipment can emit sound and light alarm prompts and automaticallyShutdown;

22)Leakage protection:Install a leakage switch at the control power inlet of the equipment.When there is a leakage, cut off the control power to disconnect the entire cabinetElectricity:

23)overcurrent protection：Each workstation is protected by a fuse (circuit breaker) to prevent overcurrent or short circuit in the circuit.

24)overload protection：The device is equipped with a circuit breaker inside, and when there is a malfunctionAutomatically jump off during loading;

25)Threshold protectionAll activity cabinet doors are equipped with safety protection switches. When the cabinet door is opened, the power supply is automatically cut off，To prevent the risk of electric shock to operators.

26)Emergency stop switchThe control panel of the power cabinet has an emergency stop switch, which facilitates the operator to cut off the output power of the power cabinet in case of abnormalities or necessary situations：

27)In and out leads: Both input and output lead ports are equipped with protective coils to prevent cable damage;

28)This device does not include test loads

29)Dimensions: ApproximatelyW1600mmxD1300mmxH1650mm

30)Weight: Approximately250Kg

31)Power supplyAC220V±10%、50Hz、20A；