-
E-mail
13662752676@163.com
-
Phone
13662752676
-
Address
Building 2, No. 25 Yuanxia Road, Changping Town, Dongguan City, Guangdong Province (Yihai Technology Park)
Product Categories
Dongguan Haotian Testing Equipment Co., Ltd
Which is a good semi-automatic constant temperature and humidity FPC bending testing machine
NegotiableUpdate on 05/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Cold resistant and moisture resistant bending test machine with low noise can be used for a long time: film, adhesive products, chemical raw materials, secondary processing equipment and related accessories.
Product Details
Cold resistant and moisture resistant bending test machine, low noise, can be used for a long timeThin films and adhesive products can undergo temperature, humidity, and 180 degree bending tests.
Technical parameters: Temperature and humidity
⒈GB11158Technical conditions for high temperature test chamber
⒉GB10589-89Technical conditions for low-temperature test chamber
⒊GB10592-89Technical conditions for high and low temperature test chambers
⒋GB/T10586-89Technical conditions for wet heat test chamber
⒌GB/T2423.1-2008Low temperature test chamber test method
⒍GB/T2423.2-2008High temperature test chamber test method
⒎GB/T2423.3-2006Damp heat test chamber test method
⒏GB/T2423.4-2008Alternating damp heat test method
⒐GB/T2423.22-2002Temperature change test method
⒑IEC60068-2-1.1990Low temperature test chamber test method
⒒IEC60068-2-2.1974High temperature test chamber test method
⒓GJB150.3high temperature test
⒔GJB150.4Low temperature test
⒕GJB150.9Damp Heat Test
Cold resistant and moisture resistant bending test machine, low noise, can be used for a long time
temperature range |
A:0℃~150℃B:-20℃~150℃C:-40℃~150℃ D:-60~150℃ |
humidity range |
20~98% RH |
fluctuation/uniformity |
≤±0.5℃/±2℃ |
temperature deviation |
+2%The-3%R? H |
warm-up time |
-20℃~100℃about35min -40℃~100℃about45min -70℃~100℃about55min |
cooling time |
25℃~40℃about55min 25℃~60℃about65min 25℃~70℃about80min |
Technical parameters: Bending machine
Angle: 180 degrees
角度： R1~R20
Materials used
outer box material |
High quality carbon steel plate, surface phosphating and electrostatic spraying treatment |
Inner box material |
SUS304High quality mirror finish stainless steel light plate |
thermal insulation material |
Ultra fine glass fiber cotton |
Door frame insulation |
Double layer high and low temperature aging resistant silicone rubber door sealing strip |
Finished product case diagram
Similar Product Recommend
