Two axis servo manipulator

Two axis servo series

COBRA series:

Suitable for various types of horizontal injection molding machines with a capacity of 450-4000 tons, including Yangpin and Shuikou, with double section arm types; An auxiliary arm can be added for the three piece mold, which can simultaneously clamp the finished product and the material head. The up and down stroke ranges from 1350~2500mm and is driven by a cylinder. The horizontal axis standard is driven by a variable frequency motor, and can be optionally driven by an AC servo motor. Up and down pulling is driven by a cylinder, saving costs. The upper and lower shafts of the finished arm can be driven by AC servo motors as needed to increase the efficiency of removal from the mold. Installing COBRA series robotic arms can increase production capacity (20-30%), reduce product defect rates, ensure the safety of operators, reduce manual control of production, and minimize waste.

Body structure:

The horizontal axis is driven by a variable frequency motor, or an AC servo motor can be selected for driving. The up and down and pulling shafts are driven by cylinders. Horizontal, pull out, and upper and lower arms all use imported high rigidity linear sliding rails. The pull out and upper and lower arms use lightweight and high rigidity aluminum alloy extruded beams combined with linear bearings and high rigidity bearing steel, which can achieve the requirements of fast removal speed, high efficiency, low vibration, and long service life. The modular design is better and the parts interchangeability is better.