T280H high-pressure control valve

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

T280H high-pressure control valve

Product Details

T280H high-pressure control valve

The high-pressure control valve adopts a fluid pressure balance structure, which has the characteristics of smooth operation, high flow capacity, and low noise.

♦ Trim Type of Internal Components

1. Standard type internal components
Suitable for working temperatures ranging from -250 ℃ to+560 ℃, with a leakage level of IV.

2. Sealed ring
Suitable for working temperatures of -196~+316 ℃, with leakage levels of IV and V.

3. Low noise type
Suitable for situations where the pressure difference is less than 5.5MPa and the noise level is below 80dB (A)

♦ Standard specifications

Form Type	High pressure control valve
Nominal diameter Body Size	DN20~DN300 (3/4)
Nominal Pressure Body Ratings	PN160, 220, 250, 320, 420; ANSI Class900, 1500, 2500
Body&Bonnet Material for Valve Body and Cover	A105, F304、F316, Forging 12Cr1MoV, WCB, CF8, CF8M, WC6, WC9, LCB, LCC, Hastelloy C
Packing Packing	V-PTFE/Flexible Graphite
Gasket gasket	GRAP+304, GRAP+316, PTFE
Connection method: Connections	Flange type (RF, MFM) Range type (RF, MFM)/Welding type (SW, BW) Welding type (SW, BW)
Coating Color	Brown painting/Stainless steel valve body can be left unpainted. No painting on stainless steel valve body
Executing Agency: Actor	Pneumatic type, electric type, and manual operation type
Valve cover type Bonnet Type	Standard type, heat dissipation type Standard type, Fin-Extension type

Note: The above are only standard combinations, and specifications outside of this table are also possible depending on the operating conditions.