Supplier of fully automatic insulation resistance tester

insulating materialVolume surface resistivity testerRZ2118AIt is a commonly used measuring instrument for electricians. Most of them are powered by hand cranked generators, so they are also known as shaking meters, with scales in megaohms (M Ω). Mainly used to check the insulation resistance of electrical equipment, household appliances, or electrical circuits to ground and between phases, to ensure that these devices, appliances, and circuits are working in normal condition, and to avoid accidents such as electric shock injuries and equipment damage.

1、 Advantages of RZ2118A Insulation Material Resistance Tester:

1. Equipped with overcurrent protection function and anti short circuit protection

2. Remote control via mobile app and network (optional)

3. Support personalized customization

2、 Meet the standards:

1. GB 12014 Anti static Work Clothes;

2. GB/T 24249-2009 Anti static clean fabrics;

3. GB/T 26825-2011 Anti static and Anti corrosion Adhesive;

4. GB 50515-2010 Code for Design of Conductive (Anti static) Grounds;

5. GB/T 20991-2007 Test Methods for Personal Protective Equipment Shoes;

6. GB 4385-1995 Technical Requirements for Anti static Shoes and Conductive Shoes;

7. GB/T 12703.4-2010 Evaluation of Electrostatic Properties of Textiles Part 4: Electrical resistivity;

8. GB/T 22042-2008 Test method for surface resistivity of anti-static performance of clothing;

9. GB/T 15738-2008 Test Method for Electrical Resistance of Conductive and Antistatic Fiber Reinforced Plastics;

10. GB/T 18044-2008 Carpet Static Behavior Evaluation Method Walking Test;

11. GB/T 18864-2002 Limits of electrical resistance for antistatic and conductive products used in vulcanized rubber industry;

12. GB/T 1410-2006 Solid insulation materials - Test methods for volume resistivity and surface resistivity;

13. GJB 5104-2004 General Requirements for Anti static Coatings and Electrostatic Performance of Radio Fuze Wind Hats;

14. GB/T 12703.6-2010 Evaluation of Electrostatic Properties of Textiles Part 6 Fiber Leakage Resistance;

3、 Technical parameters of RZ2118A insulation material resistivity tester:

1. Display mode: LCD display

2. Measurement accuracy: 1-10%

3. Resistance measurement range: 1 × 104 Ω~1 × 1018 Ω.

4. The current measurement range is: 1 × 10-4A to 1 × 10-16A

5. Power supply form: AC 220V, 50HZ, power consumption of about 12W

6. Display content: Measure voltage, resistance, and current.

7. Test requirement: Diameter greater than 100mm (for sizes smaller than this, electrodes need to be customized)

8. Usage conditions: Environmental temperature: 15-40 ℃ Environmental humidity: 30-70%

9. Built in test voltage: 10V, 50V, 100V, 250V, 500V, 1000V

4insulating materialVolume surface resistivity testerScope and Function of Application:

Mainly suitable for measuring the volume, surface resistance, and resistivity of solid insulation materials (such as plastics, rubber, laminates, films, resins, mica, ceramics, glass, insulation paints, and other insulation materials and components), powders, liquids, and various insulation materials.