Socket welding machine 20-63 fixed

NegotiableUpdate on 04/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The manual hydraulic hot melt socket welding machine is mainly used for socket connections of large-diameter PP-R and other plastic pipelines. It has: the center surface of the socket pipe and fittings, the hydraulic pressure surface of the frame, and the center surface of the heating probe are all on the same surface, which ensures uniform force during welding.

Product Details

Basic technical parameters
Specification Model	Fixed temperature 20-63
Welding range (mm)	20. 25, 32, 40, 50, 63
Working voltage (V/Hz)	Communication 176V-245V 50 ± 1HZ
Heating head temperature (℃)	260±5℃
Environmental temperature (℃)	-20℃ -- 50℃
relative humidity	45% -- 95%
Whole machine power (W)	1000
Dimensions (mm)	400×200×60

Performance and features:

EThis product is suitable for hot melt socket welding of thermoplastic pipes such as PERT, PP-R, PE, PP-C, PB, etc.
EReplacing the mold head can be used for welding plastic pipes and fittings of various diameters and sizes (ф 75-110MM).
EThis product has the characteristics of accurate temperature control, high reliability, high safety index, strong environmental adaptability, and a sturdy structure,

Convenient and fast, the welded pipe fittings interface is stronger than the pipe itself. Widely used for water supply and drainage, sewage

Installation, construction, and maintenance of plastic pipes for air conditioning refrigeration systems, communication systems, and other related systems.

Usage:
EInstall the heating end of the fixed fusion splicer, place the fusion splicer on the rack, and install the corresponding heating die according to the required pipe specifications,

And tighten it with an inner hexagon, usually smaller at the front end and larger at the back end.
EConnect the power supply (note that the power supply must have a grounding protection wire), follow the instructions in the corresponding model machine manual, and pay attention to the changes in the indicator light,

The operation can only be started when the fusion splicer enters the working temperature control state.
ECut the pipe vertically with a pipe cutter, and push the pipe and fittings into the fusion splicer die without rotation at the same time, and operate according to the requirements.

After reaching the heating time, immediately remove the pipe and fittings from the mold head and insert them evenly and quickly to the desired depth without rotation,

Form a uniform flange at the joint.