Signal Surge Protector SLP07D

MTL Surge Protector IOP32Introduction

The IOP series is designed to provide protection for both digital I/O and analog I/O. It is an economical I/O surge protection solution in Eaton products. The high packaging density, high protection level, and low price make the IOP series a popular solution.
The IOP series is not only cost-effective, but also retains a hybrid circuit consisting of 20kA gas discharge tubes and solid-state components. In terms of design, this impressive product has very low line resistance, thus only adding a small voltage drop in the circuit.
The detachable terminals of the IOP series are easy to install and maintain, and the circuit can also be disconnected by unplugging the terminals on the module side. The angle of the wire entry helps with wiring inside the confined space of the enclosure.

MTL Surge Protector IOP32Technical Specifications

When all numbers are at 25 ° C (77 ° F)
The standard value, unless otherwise specified.
inrush current
20kA (8/20s waveform)/line
leakage current
<1a， Under working voltage conditions
Rated load current
0.675A (IOP HC32 is 5A)
loop resistance
IOP32 & IOP32D：4 ohm
IOP-AC：1 ohm
IOP HC32：0 ohm
bandwidth
6.5 MHz (IOP HC32 not applicable)
attenuation
< –0.3dB @ < 1MHz
–3.0dB @ 6.5MHz
response time
<1ns
ambient temperature
Work and Storage
-40 ° C to+80 ° C (-40 ° F to)
+176° F)
(See "Approval" below)

humidity
5-95% relative humidity (non condensing)
terminal
2.5mm2（12 AWG）
electrical connection
Plug/head screw terminal board
install
T-shaped beam DIN rail
(35 x 15mm guide rail)
weight
About 140g (5oz.)
Shell flame resistance
UL94-V0
EMC Compliance
BS EN 61326-1:2006
Electrical safety
BS EN 60950-
1:2006+A12:2011
BS EN 61010-1:2010

IOP32

IOP32D

IOPHC32