Selling pesticide bulk density tester

1.Pesticide Bulk Density Tester Particle Bulk Density Tester DP-LIR

The granule bulk density tester is based on the standard of "Pesticide Bulk Density Determination Method". Suitable for the determination of bulk density and solid density of solid preparations such as granules and water dispersible granules. This instrument has the characteristics of easy operation, durability, and accurate testing, and is an instrument for testing the bulk density of granules.

Pesticide Bulk Density TesterTechnical Specifications
Falling rate: 1 time/2 seconds
Drop height: 25mm
Measuring cylinder volume: 250ml
Working power supply: AC220V ± 10V 50HZ
Power: 100W
Environmental temperature: 10-40 ℃
Environmental humidity: ≤ 80%

2.Pesticide seed treatment formulation adhesion tester DP-NYR

The coated seeds fall onto the guide groove partition door through the glass funnel at the top of the instrument. Open the partition valve, and the seeds freely fall onto the sieve from a fixed height. The powder of the medicine that falls off the seeds is separated through the sieve. After repeating the above process five times, the seed sample is used to determine the residual pesticide content on the seeds.
Glass funnel: 145-175mm
Glass guide groove: Φ 80-85 * 410-470mm
Number of road drops: 5 times, digital display count
Layout method: solenoid valve
Standard sieve: 8 mesh, 18 mesh
Power supply: AC220V

3. Pesticide dispersibility testerDP-NSR
Display mode: Full touch industrial grade LCD screen display
Test temperature: 20 ℃± 1 ℃
Display accuracy: 0.1 ℃
Temperature control method: PID thermostat for automatic temperature control, assisted by circulating water bath
Mixing method: Stainless steel mixing rod mechanical mixing
Mixing speed: 0~1000r/min (adjustable)
The suction pump automatically draws in, ensuring precise control and treatment of the suspension during the experiment, and improving the accuracy and efficiency of the test
Timing method: Automatic timing by the instrument
Result processing: Instrument calculation
Voltage and power: AC220V ± 10% 50Hz; Host 350W/Cooling bath 600W
Dimensions: Host (length x width x height mm): 410 x 450 x 550
Water bath (length x width x height mm): 290 x 490 x 710

4. Particle Wear Resistance Tester, Pesticide Moisture Dispersant Wear Resistance Tester DP-KAR

The instrument adopts integrated machine control and has functions such as "parameter setting, operation status display, and work completion alarm". A level is installed in the middle of the instrument to more accurately indicate its horizontal status, ensuring balanced operation, reducing noise, and minimizing wear on the rotating shaft.
Customers can design the required rotational speed and number of rotations according to the requirements of the experiment, which can be used for product quality inspection and control, as well as for product development and testing.

Technical Specifications:
Speed range: 50~125 revolutions per minute
Rotation speed setting: 0~20000 revolutions per minute
Motor: Variable frequency speed regulation
Timing: Digital display timing
Sample unit: Double sample (4 units can be selected)
Working power supply: AC 220V/50HZ

5. Electric vibrating screen machine DP-SLR
Technical Specifications:
LCD digital display, infinite speed regulation
Oscillation mode: Vortex oscillation
Oscillation amplitude: 4-5mm
Oscillation frequency: adjustable in multiple gears, 300-500 rpm, 900-1100 rpm, above 1500 rpm
Timing time: 00 minutes and 00 seconds -99 minutes and 99 seconds
Tray diameter: 20 centimeters
Sieve: 125 microns, with cover and receiving tray
Power supply: 220V, 50Hz