Sample Concentrator Quotation

1XT-NSY-1A Sample ConcentratorProduct Introduction:
thatXT-NSY-1A Sample ConcentratorEquipped with a built-in air source, it is compact in size and easy to carry. Equipped with a digital display head, it is suitable for rapid concentration of samples in any environment.

2、 Product Features

① Temperature control can be set arbitrarily;
② Concentrate single or multiple samples simultaneously;
③ Easy to operate and safe: flexible working parameter settings, convenient sample insertion and extraction process, easy to learn and use;
④ Adopting microcomputer processing and PID precision control;
⑤ Aluminum block bathroom is used, with good heat transfer and uniform heat transfer, which is conducive to rapid heating;
⑥ This product has a small size and is easy to carry in a portable suitcase.

3、 Product Technical Specifications:
1. Heating hole: 12 holes
2. Hole depth: 55mm
3. Air source: Air source
4. Diameter: 16.5mm
5. Temperature error: ≤± 0.5 ℃
6. Flow rate: 0-25L/min
7. Safety: Intrinsically safe for organic solvents
8. Heating power: 200W
9. Heating range: Room temperature -100 ℃

4、 Usage steps:
1. Open the portable suitcase, check if the instrument is intact, and connect the power supply.
2. Adjust the height of the bracket so that it does not come into contact with the sample liquid level (1cm).
3. Set the temperature according to the electronic component manual, and then turn on the heating switch.
4. After the temperature reaches the set temperature, remove the bracket and place the test tube containing the concentrated solution into the sample chamber. Adjust the position of the blower tube to be about 1cm above the liquid level of the test tube.
5. Turn on the air source switch and press the blow button.
After the sample concentration is completed, turn off the heating switch and the blowing switch in sequence, and remove the test tube.
7. After the temperature in the sample room drops to room temperature, restore the instrument to its operational state.