Sales price of composite silicate board pipes

Composite silicate insulation boardIt is a high-quality and efficient insulation material that integrates a closed microporous structure and a mesh fiber structure. Within the temperature range of use, it can be used for a long time without aging or deterioration, and its insulation performance remains unchanged for a long time. It has the characteristics of light weight, low thermal conductivity, cold insulation, heat insulation, shock resistance, sound absorption, etc., and can be widely used in industries such as metallurgy, chemical industry, petroleum, shipbuilding, textile, medicine, transportation, thermal power, and construction.

Composite silicate insulation boardCutting, installation, and fixed layout instructions:

1. Cutting and installation

Cut the composite silicate insulation board according to the spacing of the marble main keel, and then lay it horizontally from bottom to top along the horizontal direction. From now on, it will be vertically overlapped and fixed from the corner of the wall. Overlapping and interlocking at the corners of yin and yang. The square shaped edges of aluminum alloy window openings can be pieced together. In this case, a single piece of composite silicate insulation board should be cut and formed vertically with the gluten. The same insulation board must also be used to fix the edges of the wall. The distance between the top, bottom, left, and right sides of the board should be approximately half the length of the board.

2. Fixed

The installation depth of the anchor for the composite silicate insulation board into the structural wall shall not be less than 60mm. Generally, plastic expansion screws and steel bars with a diameter of 13mm are selected for anchoring, and impact drills are used to rotate holes in the wall with a depth of 130mm (including the thickness of the insulation board), so as to tightly connect the composite silicate insulation board with the exterior wall tiles. After tightening the steel reinforcement anchoring point, it should be 1-2mm smaller than the surface of the insulation board.

3. Layout of steel reinforcement anchoring

Steel reinforcement anchoring points are set in the middle of the square and horizontal joints of the composite silicate insulation board. The installation of chemical bolts should be spaced vertically at 400mm intervals and horizontally at 350mm intervals, arranged in a plum blossom pattern. The data at the corners of the base wall should be encrypted to a spacing of 150mm, and the design scheme and relevant regulations should be considered together.