- Phone
-
Address
Zhangjiagang City, Jiangsu Province
Product Categories
- Conical twin-screw extruder
- HDPE large-diameter pipe extrusion production line equipment
- PVC microcellular foam extrusion production line
- PVC pipe production line
- Single screw extruder
- Parallel twin-screw extruder in the same direction
- PVC/WPC wood plastic wide door panel extrusion production line
- PVC wood plastic profile extrusion production line
- Plastic auxiliary machine
- Corrugated pipe production line
Jiangsu Feige Youlian Machinery Co., Ltd
SWP series plastic crusher prices
NegotiableUpdate on 01/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
SWP series plastic crusher price technical parameters $r $n rotating blade diameter 400/630 $r $n moving blade quantity 12/4 groups/9/2 groups $r $n rotating to speed (r/min) $r $n 500/480 $r $n fixed blade quantity 2/2 $r $n sieve hole diameter (mm) $r $n 10/10 $r $n output (Kg/h) $r $n 450-700/700-850 $r $n power (KW) $r $n 27.5/44 $r $n $r $n
Product Details
SWP series plastic crusher pricesTechnical Specifications
Rotating knife diameter |
400 |
630 |
|
Number of knives used |
12/4groups |
9/2groups |
|
Rotate to RPM
|
500 |
480 |
|
Quantity of fixed knives |
2 |
2 |
|
Sieve diameter
|
10 |
10 |
|
output
|
450-700 |
700-850 |
|
power
|
27.5 |
4 |
Note: The above specifications and parameters are subject to change without prior notice
SWP series plastic crusher pricesPrinciple: Plastic crusher, as the name suggests, is a crusher that crushes plastic materials. In injection molding machines orGranulatorDuring the production of raw materials, any defective products and water outlet materials generated can be promptly fed into the plastic crusher at the machine's edge. After being crushed properly and kept clean and dry, the "rainwater material" can be usedproportional valve”In the case of a fixed proportion, the raw materials are crushed and mixed with the water outlet to form a good product, which is then recycled. Plastic crusher and other auxiliary equipment（dryer、dehumidifier、chiller、Mold Temperature ControllerThe advantage of the "crushing ratio mixing and recycling system" formed by the cooperation is that the water material is not contaminated, and the physical properties of the plastic, such as strength, density, color and luster, are not damaged, which can improve the quality of the product; The benefits include cost and material savings, automation improvements in process management, actions in quasi unmanned workshops, increased competitiveness, and environmentally friendly manufacturing activities.
Maintenance and upkeep of plastic crushers
1. The plastic crusher should be placed in a ventilated position to ensure the heat dissipation of the motor during operation and extend its lifespan
2. Lubricating oil should be regularly added to the bearings to ensure lubrication between them
3. Regularly check the screws of the dao tool. After using the new plastic crusher for 1 hour, use tools to tighten the screws of the moving and fixed knives, and strengthen the fixation between the blade and the knife holder
4. To ensuredaoThe sharpness of the incision should be checked regularlydaoEnsure its sharpness and reduce unnecessary damage to other components caused by blunt blades
5. ReplacedaoWhen using tools, the gap between the moving blade and the fixed blade should be 0.8mm for crushers above 20HP, and 0.5mm for crushers below 20HP The thinner the recycled material, the larger the gap can be adjusted appropriately
Similar Product Recommend
