Rubber conveyor belt rolling production line

NegotiableUpdate on 03/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Purpose: The main and auxiliary machines are used to match the rubber conveyor belt core. The intermittent production of canvas double-sided adhesive tape and pure film is a key equipment for manufacturing conveyor belts, tapes, and other products. Features: 1. The roller material is alloy cold hard cast iron, which is sturdy and wear-resistant; The structure is drilled around the periphery, with good heating or cold hardening effect. 2. The two ends of the roller are supported by rolling bearings, which not only saves energy but also reduces eccentricity and vibration during rotation, ensuring product accuracy. 3. The roller is equipped with a cross axis and pre bending device. When the roller deforms due to load, the cross axis and pre bending device can be adjusted to compensate. 4. The roller spacing can be adjusted at both ends simultaneously or separately. The gap size is directly measured by a displacement sensor and can be displayed digitally on the dashboard instrument. 5. This machine is driven by a DC motor and regulated by a DC speed control device, ensuring stable and reliable speed.

Product Details

Technical ParameterTechnical parameters

model Parameters	XYD-4S1730E2	XYD-4S1800A1	XY-4S2500A
Number of rollers root	4	4	4
Arrangement form	S	S	S
structural style	Drilling roller	Drilling roller	Drilling roller
Roller working diameter mm	610	700	800
Working Length mm	1730	1800	2500
Roller linear speedm/min	5--35	4--40	4--40
speed ratio	0.5--1	0.5--1	0.5--1
Height in the roller	1#. 2#. 4#	1#. 2#. 4#	1#. 2#. 4#
preload	1#. 2#. 3#	1#. 2#. 3#	1#. 2#.
Axis crossing	1#. 4#	1#. 4#	1#. 4#
Drive motor power kw	90(1#) 132( 2#. 3#.4#)	90(1# .4#) 110( 2#. 3#.)	132x4
Maximum width of rolled productsmm	1500	1600	2200
minimum thickness mm	0.2	0.2	0.2
External dimensions mm longxwidextall	8800x8960x4430	6000x4200x5020	10340x4200x4100
weight	93	100	150

Structural characteristics of auxiliary equipment:

1. There is a three station guide opening device, including a set of core guide opening devices and two sets of canvas guide opening devices. It is equipped with a cushion cloth winding device for winding the cushion cloth thrown off after the core guide is opened.

2. Equipped with drying and cooling devices, it can remove some moisture from the canvas and maintain a certain temperature, and cool down the products after gluing. The cooperation between the two devices and the host will generate tension in the front and rear large areas of the host.

3. The floating roller device consists of a cylinder, a bracket, guide rollers, limit switches, etc. When the canvas tension exceeds the set value, it controls the production line to stop and protects equipment safety.

4. The over tension protection device consists of a bracket, guide rollers, and force measuring bearings. The force bearing generates tension signals through force sensors. When the current maximum tension exceeds the set value, the relevant cylinder will activate, and the corresponding limit switch will send a stop signal to protect the equipment.

5. The device mainly consists of photoelectric detection, electrical control, deviation adjustment roller, and feeding suit motor. It is installed after the cooling device and before the winding device to correct the deviation of the adhesive tape.

6. It is equipped with a three station central winding device, consisting of a set of pad guide devices, a set of conveyor belt winding devices, and two sets of adhesive tape winding devices. Two types of winding devices are integrated into a bracket and installed on a small car: when hanging the tape core or hanging the canvas for winding, the motor can drive it to move left and right for a certain distance, keeping the center of the winding core shaft at the center of the process.

7. The transmission driver adopts digital speed regulation device, and the whole machine control adopts PLC programmable controller, applying fieldbus control technology.

Main technical parameters:

model parameter
Rolling line speed m/min	5-35 Rolled Canvas 5-20 Core covered adhesive	4-40 Rolled Canvas 4-25 Core covered adhesive	4-40 Rolled Canvas 4-25 Core covered adhesive
Maximum width of rolled products	1500	1600	2200
Maximum diameter of guide strip mm	3000	3000	3000
Maximum weight t	12	12	15
Canvas opening maximum diameter	1000	1000	1000
Drying roller specification mm	4-￠1000x1800	4-￠1000x1800	4-￠1000x2500
Roller specification mm	￠250x1800	￠250x1800	￠250x1800
Cooling roller specificationsmm	6-￠1000x1800	8-￠1000x1800	8-￠1000x2500
The maximum diameter of the coil is mm	4000	4000	4000
Maximum weight t	15	15	20
Maximum diameter of tape roll	1300	1300	1300
Dimensions (length x width x height) mm	33020x5420x5015	35000x5600x4100	40400x6570x4100
Weight T	68	83	109
notes	giveXYD-4S1730E matching Matching	giveXYD-4S1800A1Supporting facilities Matching	giveXY-4S2500A supporting facilities