Quotation for portable oil drum heating furnace

Oil drum heating furnace

Product Introduction

Also known as oil drum heating belt or silicone rubber heater, it is a type of silicone heating plate. Adopting the soft and bendable characteristics of silicone heating plates, metal buckles are riveted on the reserved holes on both sides of the heating plate, and fastened to the barrel, pipeline, and tank body with springs. Easy and fast installation. The silicone rubber heating plate can be tightly attached to the heated area by the tension of the spring, resulting in rapid heating and high thermal efficiency. The oil drum heating belt heats up the liquid and solidified materials inside the drum, such as adhesives, grease, asphalt, paint, paraffin, oil, and various resin materials. By heating the drum body, the viscosity is evenly reduced, reducing the power of the pump. Therefore, this device is not affected by seasons and can be used year-round. Sensors are installed on the surface of the oil drum heating belt to directly control the temperature through temperature regulation.

product metrics

1. Insulation material heat-resistant temperature: 250 ℃

2. Recommended operating temperature:<200 ℃<>

3. Insulation resistance:>50M Ω

4. Dielectric strength:>1500V/1 min

5. Power deviation: ± 10%

Product Specifications

1. Cylindrical heater 200 liters, size 250 × 1740, capacity 2000W, weight approximately 0.5kg

2. Cylindrical heater 20 liters size 200 × 860 capacity 800W weight approximately 0.4kg

3. Cylindrical heater 200 liters, size 125 × 1740, capacity 1000W, weight approximately 0.3kg
Installation requirements

1. During installation, the silicone rubber flat side of the electric heating belt should be tightly attached to the surface of the medium pipeline and tank, and fixed with aluminum tape.

2. To reduce heat loss, an insulation layer should be added on the outside of the electric heating belt.

3. Overlapping and wrapping installation is strictly prohibited to prevent overheating and damage.
Product Usage

Oil drum heating furnaceIt is used for heating, tracing, and insulation of barrel shaped equipment such as tanks, pipelines, etc. It can be directly wrapped around the heated area for easy installation and disassembly. Especially suitable for the dissolution of paraffin wax, preventing wax deposition of oily objects in winter.
The surface temperature of the heater when suspended in static air at 20 degrees Celsius is 150 degrees Celsius.
The temperature of the heater may vary depending on the environment of use, the material and shape of the heated object.