Quotation for electrostatic gun

NOISEKEN ESS-S3011A&GT-30RA fully supports intelligent ESD from the beginning to the end of the trial.

NOISEKEN electrostatic gunKey Features:

In order to implement more reliable experiments, there are three self checking functions

Reduce installation errors by checking the CR value (displayed)

● Single key replacement of discharge box and CR components!

● Easy to set 'buttons&knobs'

An 'infrared remote control' that can also be set far away from the tester

Confirm the 'discharge check function' during air discharge

● More easily achieve long-term experiments! Lightweight discharge guns in the industry (survey)

● Illuminate the 'LED light' of the EUT

● Control software that can be used to create test reports and PC controls

Realize more reliable experiments with three self checking functions:

The discharge gun has become lighter and easier to operate:

Noiseken's GT-30RA discharge gun achieves lightweight and center of gravity balance, which is lighter than before and improves the balance of the center of gravity. It is not only easy to grip, but also reduces the burden on the wrist during testing. Please make sure to hold it in your hand and feel it. Also, it was difficult to confirm the presence or absence of discharge during air discharge in the past, but now the confirmation of the presence or absence of discharge can be done not only by the tester itself, but also by the LED light on the discharge gun. In addition, the ESS-S3011A/GT-30RA electrostatic discharge generator also has multiple functions such as single key replacement of CR components, illumination of LED light at the static electricity application site, etc.

NOISEKEN electrostatic gunTechnical Specifications:

Output polarity: positive/negative

Output voltage: 0.20kV~30.0kV ± 5% (30.5kVmax)

Repetition period: 0.05s to 9.99s ± 10%, 0.01s step size/manual

Discharge frequency: 1-999 times, set 1 step size, or continuous

Static electricity application mode: contact discharge/air discharge trigger mode gun trigger/body trigger

Operation panel display: 5X7 dot matrix LED

Operation: Button (partially illuminated)

Contact discharge mode: 2.0kV, 4.0kV, 6.0kV, 8.0kV

Air discharge mode: 2.0kV, 4.0kV, 8.0kV, 15.0kV

Charging capacitor/resistor: 150pF ± 10%, 330 Ω± 10%

Charging resistance of the main body: 10M Ω (combined with 43M Ω on the discharge gun side to form 53M Ω)*

LCD panel with excellent recognition:

The operability before the redesign has been improved to make it easier to use and operate. The test levels according to IEC standards have been stored on the IEC Standard, so simply selecting the test level allows for easy setting. On MANUAL, voltage and test times can be set, and the setting conditions can be remembered. Also, it can be set in scanning mode. SEQUENCE is a combination of conditions set in MANUAL that can be read out.

Experimental testing environment:

Expand the supported testing environment by using two types of testing instruments, desktop and floor standing, in an electrostatic testing environment that complies with EN/IEC 61000-4-2 standards. The experimental table, because it is made of wood, has a relatively small impact on the experiment (high-frequency electromagnetic fields can be applied to the test equipment without any loss, so it has good quantifiability). Therefore, it can conduct experiments with high repeatability. At the same time, it has multiple uses and can be used in electrical fast transient pulse group tests and high-frequency noise tests.