Quotation for circular natural gas pipeline filter element

　　Natural gas filter cartridge 114 * 914Characteristics of natural gas filter cartridge:

1. Good filtration performance and uniform surface filtration performance for filter particle sizes ranging from 2-200um;

2. Good corrosion resistance, heat resistance, pressure resistance, and wear resistance; And it can be repeatedly rinsed and has a long service life.

3. Uniform pores and high filtration accuracy;

4. The natural gas filter has a large flow rate per unit area;

5. The filter element is suitable for low and high temperature environments; After cleaning, it can be reused without replacement.

　　Natural gas filter cartridge 114 * 914The natural gas filter element has a circular structure that is not easily damaged; Multi layer sintering, high strength and stiffness; The increasing (or decreasing) density of each layer of the filter element gives it high storage and agglomeration capacity; The hydrophilic and oleophilic properties of the material enable the filter element to have a high processing capacity; There is no wrapping or glue on the filter element, which has good chemical compatibility.

Gas filter cartridge is suitable for gas-liquid and liquid-solid separation of natural gas, artificial gas, and other non corrosive gases such as nitrogen, carbon dioxide, propane, butane, etc. It is a separation and purification equipment component on natural gas gathering and transmission pipelines and gas gathering stations, pressure stations, distribution stations, cleaning stations, terminal stations, and various application fields. It can effectively filter the dirt and debris of pipe wall peeling in the pipeline to ensure the safe operation of gas transmission and gas equipment, meet the quality requirements of pipeline transportation and users for natural gas.

The service life of the filter element is greatly affected by the cleanliness of the filter medium, and the maintenance of the filter element is also important. When the pressure difference between the two ends of the filter exceeds a certain value, the filter element needs to be cleaned or replaced. Cleaning should be carried out in a clean environment to prevent secondary pollution. High pressure backwashing can be used for cleaning, or water backwashing can be used, but the filter element should be dried in a timely manner to prevent rusting of the support frame. Before reinstalling the filter element, be sure to check the position and wear of the sealing ring. If there are any problems, they should be replaced in a timely manner.

The core of technology is the ability to specially design each layer of mesh that makes up the cohesive filter element. Special filter materials are precisely calculated and combined using fibers of different sizes and designs of different densities for each layer. By controlling the density of each layer and placing each layer in different positions within the filter material, the manufactured filter can work in a special way and have high performance. Each layer of a complete filter element is composed of many thin sheets to ensure the removal of pollutants of different sizes.