Quotation for UV aging test chamber

NegotiableUpdate on 05/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The UV climate test chamber, also known as the UV climate aging test chamber, is a type of test chamber that uses American (ATLAS) fluorescent ultraviolet lamps as the light source. It simulates the ultraviolet radiation in natural sunlight, simulates the condensation dew function through a humidification system, and accelerates the weather resistance test of materials through spraying to simulate rainy weather, in order to obtain the results of material weather resistance. Test the aging resistance of the product by artificially reproducing environmental conditions such as ultraviolet radiation, high temperature, high humidity, condensation, rain, and darkness in natural climate.

Product Details

UV climate test chamberNot only can it simulate ultraviolet light carried in sunlight, but it can also simulate high-temperature and high humidity environmental tests,This device can simulate the hazards caused by ultraviolet light, rainwater, and dew on industrial materials, using the American Asia Pacific Laszling UV light（UV）The lamp simulates the effect of ultraviolet light irradiation in sunlight, using condensation to simulate moisture and dew,Simulate rainy and drizzling weather using sprinklers. The tested material is placed in a cyclic environment program with alternating climates for testing. The hazards that occur outdoors for months to years can be reproduced in a shorter testing time. The types of hazards include fading, cracking, turbidity, foaming, discoloration, loss of luster, powdering, brittleness, strength degradation, and oxidation.

UV climate test chamberTechnical parameters:

high temperature:room temperature+10～70℃； Blackboard measurement range:45～80℃。

high humidity:≥90%RH.

Temperature fluctuation: fluctuation:±3℃； Temperature resolution:0.1℃。

Center distance of the lamp:70mm(Center distance between the test sample and the lamp tube: Plate base frame test plate (adjustable up and down).

Lamp model:UVA-340(315～400nm)TheUVB-313(280～315nm)Optional, our standard configuration6Support the lamp tube.

Lamp brand: AmericanATLASOriginal.

Radiation intensity:1.0W／m2／340nmInternally adjustable(Can output according to the set light intensity).

Controller: Taiwan, China programmable7Inch true color touch screen controller（QTEST）.

Provide comprehensive and detailed real-time monitoring and curve recording of important experimental parameters such as irradiance, temperature, and time (controller with recorder function), and generate reports and print curves through the computer.

Can be irradiated separately/condensation/Water spray test, can also be programmed with any combination of irradiation/condensation/Water spray test.

Adopting a true color touch screen control system, it has good stability, monitoring, operability, and maintainability.

Provide lifespan reference for expensive ultraviolet lamps (lamps are consumables with a lifespan of approximately)1600Hours), convenient for users to confirm the replacement time of the lamp tube, saving usage costs. Through the irradiance measurement and control device (solar eye), the irradiance can be measured and controlled to automatically stabilize at the set value, greatly extending the service life of the lamp.

Adopting automated water supply and drainage design, combined with high cost high-power mercury water, to ensure the flow rate and uniformity of water spray.

Most of the main components are used,A small portion adopts domestic brands, which improves the safety and reliability of the products. (Please refer to the attached list of main accessories for details).

The installation and wiring of the electrical part of the equipment shall be carried out in accordance with electrical standards.

Note: Sample restrictions: This testing equipment prohibits the testing and storage of explosive and volatile substance samples, as well as the testing and storage of corrosive substance samples.