Quotation for High Performance Charging Gun Cable Swing Testing Machine

National standard GBT33594 Charging gun cable torsion testing machine

Equipment model: Sun WQ

Manufacturing unit: Shenzhen Sunshine Yueda Technology Co., Ltd

One Overview of Equipment Standards:

The cable swing testing machine is designed according toGB∕T 33594-2017Electric vehicle charging cable 第11.5.7.3Swing test.

At the same time, according toCQC1103-2015-Technical specification for cables used in conductive charging systems for electric vehicles terms10.5.3.2Requirements for torsion pendulum test;

two.Equipment function:

Used to assess the bending resistance of non detachable power plugs (or terminals) and test the firmness of the power plug terminals.

Fix the sample to the swing mechanism of the bending machine, so that the swing mechanism is at the midpoint of the stroke. The axis of the soft cable entering the sample is perpendicular to the horizontal line and passes through the swing axis. Apply a weight to the soft cable as a load, and then swing the swing mechanism90Angle (on both sides of the plumb line)45°）The number of bends is10000Secondly, the bending rate is per minute60Next time.

three.Equipment performance parameters:

1, clip Equipment:1group;

2Swing angle: left and right respectively180Continuous adjustable degree;

3Bending rate:8～60rpm(Variable frequency speed regulation);

4, Hammer Code:50/75/100Neach1One.

four.GBT33594Standard testing requirements:

Nominal cross-sectional area of conductor6mm2Swing test shall be conducted on finished cables of and above.

At least separated by1mTwo interceptions2The segment length is not less than600mmThe cable sample.

Install the sample as shown in the diagram5On the test device shown, fix one end of the specimen to the bending fixture and apply external force to the other endFExternal forceFAnd bending radiusRThe values are shown in the table18The sample is15A cycle/Bending at a speed of minutes, during the testing process, applying force in the conductor0.1AMonitor the current.

Swing test force value:

Five After-sales service

If the instrument-National standard GBT33594 Charging gun cable torsion testing machineWhen a malfunction occurs, we will respond within 2 hours of receiving notification, arrive at the site for repair within 24 hours, and fulfill our maintenance service obligations within 48 hours to troubleshoot for the user. Avoid wasting users' valuable time.

Within 5-10 working days after the arrival of the instrument, we will send dedicated engineers to be responsible for on-site installation and debugging, and provide free training to users. The training content includes instrument composition, maintenance, working principle, basic operation, method establishment and application, until the user can master the basic application technology