Production of Vacuum Tube High Temperature Furnace

Vacuum tube high-temperature furnacePrice, vacuum tube furnace 1100 ℃ detailed introduction: It has a reasonable performance design, integrates multiple functions, and achieves ideal practicality.
1. High temperature of 1100 ℃, heating zone of 300mm.
2Vacuum tube high-temperature furnacepriceThe furnace body adopts a double-layer furnace shell structure, with fans installed between the double-layer furnace shells to raise and lower the temperature. The surface temperature of the furnace shell is low.
3. The furnace tube adopts high-purity quartz tube and both ends are sealed with SUS304 high vacuum flange.
4. The furnace material is made of imported alumina polycrystalline fiber vacuum adsorption, which saves 50% energy. The heating furnace consists of two parts, the upper and lower parts. The upper part of the furnace can be flipped backwards by 110 ℃ for easy access to experimental materials and replacement of furnace tubes. The heating element adopts Swedish Kantar resistance wire.
5. The temperature control system of the electric furnace adopts artificial intelligence regulation technology, with an instrument control accuracy of ± 1 ℃. It has PID regulation, fuzzy control, self-tuning ability, and can be programmed with various heating programs. It has a high temperature alarm function, a thermocouple damage power-off function, and a built-in parameter code control function.
6. High heating rate ≤ 30 ℃/min (recommended heating rate ≤ 10 ℃/min), can write 30 segment automatic heating program, controlled by thyristor, equipped with digital LED voltmeter and ammeter, using K-type thermocouple.
7. Optional RS-485 communication interface, data management software, with paperless recording of historical data and temperature rise curves, correction of temperature deviation errors, and the ability to manage multiple devices and remotely diagnose and analyze faults.
8. Multiple protective designs, good performance, and long service life.
The temperature zone vacuum atmosphere tube furnace uses silicon carbon rods as heating elements; Double layer air-cooled structure; High purity alumina fiber vacuum adsorption one-time molding; High density silicon carbide rod vacuum extrusion molding; The outer diameter of the corundum tube is 60 and 80mm. The three temperature zones are controlled by three vertical temperature control systems, all of which are programmed with PID 30 temperature control. By adjusting the temperature control program of the three temperature zones, a temperature gradient can be formed in the temperature field inside the furnace tube. Stainless steel flanges are installed at both ends of the furnace tube, and gas nozzles, valves, and pressure gauges are installed on the stainless steel flanges. When vacuuming, the vacuum degree can reach 10-3 Pa. This series of vacuum atmosphere tube furnaces can use CVD or PVD methods to grow nanomaterials and produce various thin films.