Production of Precision SZCB-03 Hall Direction Sensor

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

SZCB-03 Hall Direction Sensor: Gear Material: The gear material should be made of a metal material with strong magnetic permeability. Tooth profile: Forming an involute tooth profile is the most suitable tooth profile. Using large modulus gears or other tooth profiles will result in significant waveform distortion, which will hinder accurate measurements. If the spindle has axial movement, it should be noted that the center of the magnetic pole should be at the center position of the gear.

Product Details

SZCB-03 Hall Direction Sensor

Using the Hall effect principle, when the metal teeth pass through the front end of the Hall sensor, it causes a change in the magnetic field. The Hall element detects the change in the magnetic field and converts it into an alternating electrical signal. The sensor's built-in circuit amplifies and shapes the signal, outputting a good rectangular pulse signal. The measurement frequency range is wider, and it can measure 0 speed. The output signal is also more accurate and stable, and it is easy to install. It is widely used for measuring the speed of vehicles, motors, fans, and steam turbines.

Technical Specifications:

1. Working voltage: DC5-30V

Measurement range: 0-20KHz

3. Speed measuring gear form: module 1-3 (involute gear)

4 output signal: square wave, whose peak to peak value is approximately equal to the amplitude of the working power supply voltage, independent of the speed

5. Working temperature: -30 to+120 ℃

6 thread specifications: M16 × 1 × 80mm or M12 × 1 × 80mm (can be customized)

Installation gap: 1-5mm

8 Weight: Approximately 100 grams

SZCB-03 Hall Direction Sensor

Using the principle of electromagnetic induction to achieve speed measurement. This sensor has strong output signal, good anti-interference performance, easy installation and use, and can be used in harsh environments such as smoke, oil and gas, water and gas.

Electrical indicators:

DC resistance: 200 to 550 Ω (25 ℃)
Working temperature: -10 to+120 ℃

Magnetic electric speed sensors, when combined with vibration and intensity scales, can measure various displacements, velocities, etc. The vibration of the rotor supported by rolling bearings will be sufficiently transmitted to the bearing seat. The speed sensor installed on the bearing seat or very close to the bearing housing will cut the magnetic field lines by the internal motion coil and output voltage, providing signals to the monitoring instrument for predicting and alarming mechanical faults.

Magnetic electric speed sensor for wind turbine

Environmental indicators:

The advantages of reliability and long lifespan make it suitable for use in harsh environments such as smoke, water vapor, oil and gas