Principles of Domestic Constant Temperature and Humidity Laboratory

Constant temperature and humidity laboratory for fuel tankStructure and components:

Inner and outer box material: Inner box - USU # 304 mirror stainless steel plate; Outer box - SUSU # 304 stainless steel or SUS # 304 sandblasted stainless steel plate spray coating

Insulation material: hard polyurethane foam+glass wool

Controller: P installation, Korean TEMI human-machine interface touch screen controller, mainly equipped with Italian, Danish or Japanese components

Freezing system: French Taikang fully enclosed compressor/environmentally friendly refrigerant

Protection devices: compressor overheating, overcurrent, overpressure, heating humidification air burning, box temperature rise, water shortage system

Power supply: 3 ф 5W380VAC ± 10% or 2 ф 3W220VAC ± 10%

Constant temperature and humidity laboratoryStandard configuration:

Observation window (lighting inside the box), one ф 50mm cable hole (located on the left connection), two sets of sample racks (adjustable height), mobile work wheel, humidification water tank

Optional communication interface, recorder, built-in glass door and operation hole, equipped with computer connection and printing software

Special requirements can be customized according to requirements

Main technical parameters:

Temperature range: Low temperature 0 ℃ -70 ℃, up to -150 ℃; High temperature of 150 ℃, up to 200 ℃.

Humidity range: 20-98% R.H, can be customized to 10-98% R.H according to requirements

Temperature fluctuation: ± 0.5 ℃ Temperature uniformity: ± 2 ℃

Heating rate:>3 ℃/min

Cooling rate:>1 ℃/min, fast up to 5 ℃/min

Humidity fluctuation: ± 3% R.H

Humidity uniformity: ± 2.5% R.H

Constant temperature and humidity laboratoryModel: TH-80/120/150/225/408/800/1000L (M.H)

Control method and features: Balanced Temperature and Humidity Control System (BTHC) controls SSR in a P.I.D. manner, ensuring that the heating and humidification capacity of the system is equal to the heat and humidity loss, thus enabling long-term stable use.

Studio sizes: 80L, 120L, 150L, 225L, 408L, 800L, 1000L, or customized according to requirements. The walk-in constant temperature and humidity chamber can reach up to 100 cubic meters.

Constant temperature and humidity laboratoryProduct use: Constant temperature and humidity chamber, also known as environmental testing chamber, is used to test the heat resistance, cold resistance, drying resistance, and moisture resistance of various materials. Suitable for quality control in industries such as electronics, electrical appliances, food, vehicles, metals, chemicals, and building materials.

Constant temperature and humidity laboratory for fuel tankCan meet the following standards: GB2423.1-89 low temperature test method, GB2423.2-89 high temperature test method, GB2423-93 test D6 alternating humidity test method, IEC68-2-30 test method.

The prices of various experimental equipment released are only symbolic displays and cannot be used as actual prices. The actual prices are subject to the quotation made by Aisili salespersons according to customer requirements