Price of domestic charging gun pendulum impact testing machine

Shenzhen provides high-quality charging gun pendulum impact testing machine

Equipment model: Sun BC

Manufacturing unit: Shenzhen Sunshine Yueda Technology Co., Ltd

One Overview of Equipment Standards:

The pendulum impact testing machine isGB/T20234.1-2022The new version of the standard "Connection Devices for Conductive Charging of Electric Vehicles"1Part: General Requirements7.10mechanical strength

The test is conducted according toGB/T11918.-2014Industrial plugs, sockets, and appliance couplers1Section: General Requirements24The test method specified in the chapter on mechanical strength shall be carried out.

24.2The impact test device is used to impact the sample. The guidelines and instructions for the experimental setup are provided in the appendixAThe experimental setup consists of the following diagram7As shown.

with pictures7The impact testing device shown performs tests on each specimen5The second shock.

head4The secondary impact is applied after the specimen is installed on the vertical plate according to normal usage requirements. The pendulum should be installed so that it swings with the vertical plate before being applied. The pendulum should be installed so that its swing is parallel to the vertical plate, and the impact surface of the pendulum should be arranged so that when the pendulum is freely suspended, the impact surface just touches the side of the electrical accessory. The contact point should be located at the geometric center of the side of the electrical accessory, or at the corresponding protrusion on that side. Then, lift the pendulum, release it, and perform an impact. Then, rotate the electrical accessory around its axis perpendicular to the installation surface90Adjust the position of electrical accessories and the impact surface of the pendulum if necessary. Then make a second impact.

II Main performance parameters of the equipment:

1.Rotation axis direction:XYZAdjustable direction: ≥30mm；

2.Back plate and mounting plate of impact testing device:8mmSteel, with four quick locking fasteners, equipped with a fixed test objectuniversalFixture;

3.Pendulum length:1000mm；

4.impact energy:：1JThe2JThe3JThe4JThe5JThe6J；

Table 1Impact energy of swing ball impact test

4 More equipment information:

Sincerely thank you for clicking on this webpage to view and learn about the products produced by Sunshine YuedaShenzhen provides high-quality charging gun pendulum impact testing machineIf you would like to learn more about the testing equipment for charging guns related standards such as GB/T20234.1-2022, GB/T11918.1-2014, IEC62196-1:2022.