Price of belt oil-water separator

paper tape filter（Product Introduction）

paper tape filterUsed for filtering coolant in metal grinding or other processing, as well as for removing impurities from cleaning fluids, industrial water, organic solutions, and other solutions in the cleaning system of rough parts.

paper tape filterComposition: The paper tape filter mainly consists of the following parts: liquid tank, waste cloth tank, filter non-woven fabric (commonly known as filter paper), transmission structure, signaling mechanism, driving device, water flow buffering device, electric control device, and liquid pump.

paper tape filterPrinciple: The paper tape filter relies on the gravity of the liquid itself to pass through the filter cloth, isolate impurities, and achieve the purpose of purifying the liquid. The chain and wire mesh of the transmission mechanism form a certain depth of liquid pool, and the filter cloth is laid on the chain and wire mesh. When the contaminated liquid carrying impurities flows onto the non-woven fabric through the water flow buffer device during work, the impurities are isolated by the filter cloth to form a filter cake. The filter cake becomes thicker and the liquid level of the contaminated liquid rises. The floating liquid level controller sends a signal, and the reducer starts to drag the filter cloth. The dirt and dirty cloth fall into the dirty cardboard box, thereby achieving automatic replacement of the filter cloth; After the filter cloth is updated, the liquid level of the contaminated liquid drops, the reducer stops rotating, and the machine enters the next filtration cycle. The filtered pure liquid is transported to the host by a liquid pump.

paper tape filtercategory

At present, paper tape filters can be divided into two categories: gravity paper tape filters and forced paper tape filters

1. Gravity type paper tape filter: Flat mesh paper tape filter, drum type paper tape filter, arc mesh paper tape filter, plate and frame paper tape filter, etc. all belong to the category of gravity type paper tape filter. Paper tape filtration relies on the gravity of the liquid itself to penetrate the filter cloth to form filtration. This type of filter generally has a filtration capacity ranging from 50L/min to 2000L/min, with a filtration accuracy of around 15-20 microns. It occupies a small unit area and is suitable for single machine filtration, such as cold rolling liquid filtration systems.

2. Series of forced paper tape filters, negative pressure paper tape filters, positive pressure paper tape filters, Huffman paper tape filters, etc. These filters can achieve a flow rate of 5000L/min, a filtration accuracy of 10 microns, fully automatic filtration, including flushing, oil removal, and oxygenation systems. This filtration form has become a trend in recent years. For example, negative pressure comprehensive filtration systems include scraping systems, filtration systems, magnetic separation systems, oxygenation systems, oil removal systems, paper collection systems, electrical control systems, etc.

paper tape filterOther: For processing non ferromagnetic materials such as stainless steel, if the waste liquid contains only non ferromagnetic impurities, a paper tape filter is generally used.

Magnetic separator（Product Introduction）

Magnetic separatorUsed for purifying coolant (chip oil or emulsion) for grinding machines and other machine tools. By using the magnetic drum of the separator to extract iron filings from the coolant, the coolant is kept clean. The use of magnetic separators can reduce the number of grinding wheel corrections, improve the surface smoothness of workpieces, and extend the service life of grinding wheels and coolant.

Magnetic separatorform

Magnetic separator is a universal separation device. Structurally divided into（I. II) Two forms.

The I (rubber roller type) series magnetic separator consists of the following parts: reducer, box, magnetic roller, and rubber roller. The reducer drives the magnetic roller to rotate, and the coolant containing powdered magnetic impurities enters the box. The impurities are adsorbed onto the outer wall of the magnetic roller, and then crushed by the rubber roller to squeeze out the liquid carried by the impurities. Finally, the scraper separates the impurities from the magnetic roller. The KFCT I (rubber roller type) series magnetic separator is widely used in the purification of cutting fluids containing powder impurities, such as surface grinders, internal and external cylindrical grinders, and centerless grinders.

The II (comb type) series magnetic separator consists of the following parts: reducer, box, magnetic roller, and scraper plate. The KFCT II (comb tooth type) magnetic separator, as an improved product of traditional magnetic separators, has many advantages: magnetic rollers of the same length are made into comb teeth, which greatly increases the adsorption area; High magnetic force and separation rate; Specially suitable for centralized separation and removal of high flow coolant; Capable of separating granular chips. The II (comb tooth type) series magnetic separator is widely used in various cutting fluid purification applications containing particle impurities, such as ordinary grinding machines, powder coating lines, roll grinding machines, steel rolling wastewater purification, and bearing grinding lines.

Magnetic separatoreffect

Magnetic separators are used for purifying coolant (cutting oil or emulsion) in grinding machines and other machine tools. They are mainly used for automatic separation of ferromagnetic substances, keeping cutting fluid clean, improving machining performance and tool life, and reducing environmental pollution. The separator drum uses strong magnetic force to remove the cutting fluid from the machine toolThe ferromagnetic chips and abrasives in the oil and water are separated to achieve automatic separation. Thereby improving the quality of processed products, reducing costs, and enhancing production efficiency.

Magnetic separatorProduct Features

1. The transmission system is separated from the casing, making cleaning and maintenance convenient.

2. The magnetic roller is evenly magnetized, and the separated debris and iron powder are dried.

3. Can handle coolant containing powdery magnetic impurities.

4. The generated magnetic field is large, and the stainless steel magnetic roller has a large adsorption area and good separation effect.

5. Simple appearance, compact structure, smooth operation, low noise, and low power loss.

6. Small size, easy to install and use, can be designed and manufactured according to the specific space of the machine tool.

Magnetic separatorApplication field

Specially suitable for the purification of coolant in various grinding machines, precision grinding machines, wire drawing machines, electrical machining and other processing equipment, as well as the purification of coolant in grinding machines and other precision machining machine tools. Most applications are in the separation of crushed materials. The main market for magnetic separators is the separation of crushed materials in mechanical processing such as lathes, grinders, and planers. They can be used in processes that require iron selection, such as industrial waste and chemical intermediate products. With the increasing use of aluminum in the market, the amount of aluminum sales inevitably increases, and the presence of iron makes it impossible to use it properly. At this time, a magnetic separator is needed for separation. There are also many requirements when refining copper powder and non-ferrous metals.