Price of Jiangsu vibrating fluidized bed dryer

ZQG type vibrating fluidized bed dryerProduct Introduction

Adopting segmented heating method, the pre drying section uses high-pressure and low air volume fans to enable wet materials to be fluidized; The drying section adopts a low-pressure and high air volume fan, which takes away a lot of moisture per unit time and dries evenly; The cooling section adopts a high volume fan, which can quickly remove heat and reduce product temperature, meeting the requirements of moisture control and facilitating subsequent packaging processes. The material enters the machine through the feeding port, and under the action of vibration force, the material is thrown forward continuously in the horizontal direction. The hot air passes through the fluidized bed and exchanges heat with the wet material. The wet air is removed by the cyclone separator and discharged through the exhaust port, while the dry material is discharged through the exhaust port.

ZQG type vibrating fluidized bed dryerworking principle

The vibrating fluidized bed dryer is caused by the excitation force generated by the vibration motor, which makes the dryer vibrate. The material jumps forward in a certain direction under the action of the excitation force. At the same time, the hot air input from the bottom of the dryer makes the material in a fluidized state. The material particles fully contact with the hot air, and undergo intense heat and mass transfer processes. At this time, the thermal efficiency is the highest, and the upper chamber is in a slightly negative pressure state. The humid air is led out by the induced draft fan, and the dry material is continuously discharged from the discharge port, thus achieving the ideal drying effect. If cold or humid air is blown into the bottom of the vibrating fluidized bed, it can achieve cooling and humidification effects.

Scope of application

Suitable for drying, cooling, and other operations of powdered and granular materials in industries such as chemical, pharmaceutical, food, dehydrated vegetables, grains, and minerals. For example: citric acid, monosodium glutamate, borax, ammonium sulfate, compound fertilizer, shredded radish, soybean meal, distiller's grains, seeds, slag, sugar, etc.

Product Features
The vibration source is driven by a vibration angle motor, which runs smoothly, is easy to maintain, has low noise, and has a long service life.

★ Uniform fluidization, no gaps or blow through phenomena, can obtain uniform drying and cooling products.

★ Good adjustability, adaptable to wide surface, material layer thickness and movement speed inside the machine, as well as full amplitude changes, can achieve stepless adjustment.

★ Minimal damage to the surface of the material, suitable for drying fragile materials, and does not affect the working effect even when the material particles are irregular

★ Adopting a fully enclosed structure, effectively preventing cross infection between materials and air, and ensuring a clean working environment.

★ High mechanical and thermal efficiency, good energy-saving effect, can save 30-60% energy compared to general drying devices.