Pharmaceutical ribbon mixer manufacturer

　　Fully automatic horizontal screw belt mixerThe inner and outer diameter screw belts installed on the mixing shaft drive the material inside the bucket, causing the mixer to extensively flip the material inside the bucket. In terms of the structure of the mixer, the screw belt is designed as an inner and outer, left and right opposite screw belt. When the mixer is working, the inner screw belt drives the material near the axis to rotate around the axis, and the axis is pushed from the inside to both sides. The outer screw belt drives the material near the barrel wall to rotate around the axis, and the axis is pushed from both sides to the inside, thus causing the material to circulate and shear mix inside the barrel, achieving rapid and uniform mixing of the material in a short period of time.

　　Fully automatic horizontal screw belt mixerFeatures of the equipment

Low residual amount: Users have always believed that horizontal equipment has a large residual amount, but in reality, this is not the case. Due to the small gap between the outer screw belt and the U-shaped cylinder wall during the processing, and the continuous operation of the screw belt during discharge, the material moves towards the discharge valve direction and is basically completely discharged.

No pollution to materials: The mixing mechanism of this equipment is integral, safe and reliable, with smooth transitions of all angular welds and easy cleaning; The lubrication parts are all located outside the barrel, with no oil droplets or debris penetrating into the material. They can be sealed to prevent dust from entering the material.

Easy to clean: Meet the requirements of timely, convenient, and fast cleaning and cleaning of the interior of the equipment for each batch and shift, leaving no dead corners.

High uniformity of mixing; Fast mixing speed, high efficiency, 6-10 times or more efficient than other mixers;

Quick and convenient discharge: usually takes 1-2 minutes to complete a batch of materials. Large loading capacity: The equipment has a loading capacity (loading factor) of over 60%.

Low requirements for the factory building: The equipment is horizontal, and various forms of driving devices and discharge positions can be freely selected, without being limited by the height or footprint of the factory building.

The equipment operates smoothly and reliably, with few vulnerable parts, long service life, easy maintenance, and simple operation.

Scope of Application

This product has a wide range of applications and can be used for mixing and blending powders with powders, powders with liquids, especially for mixing paste like, viscous, or high specific gravity materials (such as putty, real stone paint, metal powder, etc.). Widely used in the fields of pharmaceuticals, food, pesticides, dyes, chemicals, plastics, ceramics, coatings, putty, mortar, etc.

Fully automatic horizontal screw belt mixer