Multi functional explosion-proof terminal box

Explosion proof terminal box BJX51-20/40 Product Features:
1. The shell is made of aluminum alloy die-casting and the surface is coated with high-voltage electrostatic spraying;
2. The shell can be made of stainless steel according to user requirements;
3. The wiring terminal adopts wiring terminal, which is convenient, firm and reliable for wiring;
4. The direction of the inlet can be determined according to user requirements, and BDM series cable clamping sealing joints can be installed according to user requirements;
5. Introduction port G1 and below are equipped with conventional engineering plastic compression nuts, while G1 and above are equipped with aluminum clamping devices. Please specify if the user has special requirements;
6. The standard specification for the inlet of the junction box is British pipe thread, but it can also be machined with metric thread or NPT thread according to user requirements. Please specify when ordering.

Explosion proof terminal box BJX51-20/40 Technical Specifications:
1. Execution standards: GB3836.1, GB3836.2, GB3836.3, GB12476.1, IEC60079
2. Rated voltage: AC 380V
3. Rated current: 20A
4. Explosion proof mark: Exced Ⅱ CT6 Exced Ⅱ CT6 Exced Ⅱ T6, DIP A21 TA, T6
5. Protection level: IP54, IP55, IP65
6. Anti corrosion grade: WF1
7. Inlet specifications: G1/2~G4

Precautions for use:

1. Before installing and using the product, check whether the technical data on the nameplate matches the usage situation; 2. Before installation and maintenance, the front-end power supply must be cut off; 3. The incoming and outgoing cables passing through the rubber sealing ring must be tightened with washers and compression nuts to ensure that the seal and cable are not loose; 4. If the sealing ring experiences corrosion, brittle cracking, deformation, sticking or hardness changes exceeding 20% of its original value during use, it should be promptly purchased and replaced from the manufacturer to ensure reliable explosion-proof performance; 5. During maintenance and disassembly, be careful not to bump, scratch, or corrode the explosion-proof surface, and regularly apply 204-1 anti rust oil; 6. The distribution box should be regularly inspected during use to ensure its good operation; 7. Non staff members are strictly prohibited from opening the cover for maintenance and inspection.