Mixer supplier

Working principle of two-dimensional horizontal groove mixer
The two-dimensional mixer is mainly composed of three parts: a rotary drum, a swing frame, and a frame. The drum is mounted on a swing frame, supported by four rollers and axially positioned by two gear wheels. Among the four supporting rollers, two transmission wheels are driven by a rotating power system to rotate the drum. The swing frame is driven by a set of crank swing rod mechanisms, which are mounted on the frame. The swing frame is supported on the frame by bearing components.
Performance characteristics of two-dimensional mixer
The rotary drum of the EYH two-dimensional mixer can perform two movements simultaneously, one is the rotation of the rotary drum, and the other is the swing of the rotary drum with the swing frame. The mixed material rotates, flips, and mixes inside the drum, while also undergoing left and right back and forth mixing movements with the swinging of the drum. Under the combined action of these two movements, the material is fully mixed in a short period of time. The EYH two-dimensional mixer is suitable for mixing all powder and granular materials.

The CH series trough mixer is used to mix powdered or wet materials, ensuring uniform mixing of different proportions of main and auxiliary materials. The machine is made of stainless steel at the contact point with the material, with a small gap between the blade and the barrel, resulting in high mixing efficiency. The mixing shaft is equipped with sealing devices at both ends to prevent material from spilling out. The hopper is controlled by a button jog, making it easy to discharge. Widely applicable to industries such as pharmaceuticals, chemicals, and food.

Product Introduction
Used for mixing powdered or wet materials to evenly mix different proportions of main and auxiliary materials.

Performance Characteristics
The contact area between the machine and the material is made of stainless steel, with a small gap between the blade and the barrel, ensuring even mixing. The mixing shaft is equipped with sealing devices at both ends to prevent material from leaking out.

Adapt to materials
Widely applicable to industries such as pharmaceuticals, chemicals, and food.

WLDH series horizontal screw belt mixer product introduction:

The horizontal screw belt mixer is applied to the mixing of solid (i.e. powder to powder) and solid liquid (i.e. powder to slurry) materials such as dry mortar, putty powder, chemicals, putty paste, real stone paint, ceramics, refractory materials, etc. It can also stir paste like, viscous or high specific gravity materials.

Working Principle:

The horizontal screw belt mixer is driven by the inner and outer diameter screws installed on the mixing shaft to flip the material inside the drum, allowing the mixer to flip the material over a large area inside the drum. In terms of the structure of the mixer, the spiral is designed as an inner and outer, left-right opposite spiral. When the mixer is working, the inner spiral drives the material near the axis to rotate around the axis, and the axial direction is pushed from the inside to both sides. The outer spiral drives the material near the cylinder wall to rotate around the axis, and the axial direction is pushed from both sides to the inside, thus causing the material to circulate and shear mix inside the cylinder, achieving rapid and uniform mixing of the material in a short period of time.

Equipment process technology:

Introduction:

1. Under the feasibility factor, the mixing effect of the horizontal screw belt mixer is not affected by the size and density of the particles, and it also has a good mixing effect on viscous materials.

2. The smooth mixing process reduces the damage to fragile materials, and the installation of a flying knife structure also has a crushing effect.

3. The horizontal structure has a lower body height, making it easier to install.

4. In the mixing structure, the forward and reverse rotating screw bars are installed on the same horizontal axis, forming a low-power and high-efficiency mixing environment.

5. The horizontal screw belt mixer is mainly used for the production of putty powder and can also be used as an entry-level insulation mortar mixer.