Manufacturer of strength piercing force tester

YFZ02-DStrength piercing force tester

Adopting a 7-inch K600+core/dot matrix 65 color 800 * 480 resolution touch screen display, the PLC control system dynamically displays the loading force value; Optional operating interface: Chinese/English/switching between Chinese and English; Digital closed-loop control, AD acquisition speed of 500KHz, internal code of 500000; High precision clock chip, power-off storage; Overload alarm shutdown protection; Touch operation: nominal specifications, testing items, load to be loaded, printing, testing, up and down, time, calibration. And the test results will be printed by the onboard printer.

Execution standard: Design and manufacture according to the standard of "YY0043-2016".

Test items: strength, piercing force;

Nominal specification: 0.2-2.4mm; (optional)

Set load: 0.01-2.0N, with an error not exceeding ± 1%

Mold hole diameter: ¢ 5mm

Loading speed: When loaded to the set value, its speed is ≤ 10mm/s

Steel block hardness HRC ≥ 60

Test consumables: Aluminum foil

Printing method: Three puncture force test data, average value, and strength test results can be printed each time.

Delivery list: 1 host, 1 certificate of conformity, matching fixtures, 1 operating manual, 1 roll of printing paper, matching weights.

Power supply: AC90V-240V/50Hz

Data saving: onboard needle printer/USB can be imported into computer storage

Net weight: 12kg Dimensions: 400 × 240 × 240 (mm)

Service: Customizable non-standard instruments

The instrument will be upgraded and maintained for life in accordance with national standards and regulations

YFZ02-DStrength piercing force tester